703485
50
Zoom out
Zoom in
Previous page
1/54
Next page
50
7.Suspend the convector on the bracket, for which purpose attach the lower part of the
unit to the lower extension of the bracket and insert them into slots, available in the
lower part of the units rear panel. Carrying out these actions, it is necessary to hold the
unit at the angle of ~50-60 degrees (Fig.6).
8.Turn the unit in a horizontal plain until upper extensions of the bracket coincide with
the upper slots in the unit’s rear panel and slightly press on the unit until you hear clicking
of the upper extensions (Fig.6).
9.To dismount the unit press the leverages of the bracket’s upper extensions and dis-
connect the unit from it. Then carry on the abovementioned operations in the reverse
order.
Leg mounting of the convector
1.Take 2 legs out of a package box.
2.Turn over the units so that its lower part was at the top.
3.Attach legs to the lower part of the unit from the left and right sides so that the
mounting holes coincide with holes on the units case.
4.Fasten mounting screws in the present holes, exerting enough force. Check security of mounting.
5.Turn over the unit to the right position and place it on smooth, horizontal surface
strictly in a vertical position. The unit is ready to use!
Imm. 7
EN
(Fig. 4) (Fig. 5)
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sonnenkonig SLIM M 1500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sonnenkonig SLIM M 1500 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info