60928
25
Zoom out
Zoom in
Previous page
1/60
Next page
20
Make calls
Call barring
You can set Call barring facility for outgoing calls, interna-
tional calls, local calls and all incoming or roaming incoming
calls.
1. To set Call barring settings select Menu > Settings
Call settings > OK > Call barring > OK.
2. Enter a restriction password. (Your network operator
provides this before you use this function). This pass-
word will be sent to the network for verification.
 Cancel barring: when you cancel the call barring
facility you are prompted to enter a restriction pass-
word again. If the password is correct, your phone will
contact the network to disable this function.
 Barring status: when you check the status, your
phone will send a request to the network and the feed-
back will be displayed on your screen.
Call waiting
This facility can be used for GSM calls.
GSM calls
When Call waiting is enabled or turned on and your phone
is in conversation, the message Call waiting from... is dis-
played when you receive an incoming call.
1. To enable call waiting facility, select Menu > Settings
> Call settings > Call waiting > GSM call > On >
OK.
2. To cancel the call waiting facility, select Menu > Set-
tings > Call settings > Call waiting > GSM call >
Off > OK. You will not be prompted when you receive
an incoming call while your phone is busy. The caller
will receive a busy signal.
3. To verify the call waiting status, select Menu > Set-
tings > Call settings > Call waiting > GSM call >
Status.
GPRS calls
If the call waiting facility is enabled and you receive a GSM
call while you are in a GPRS session (for example browsing
the Net via the WAP service), the number of the caller is
displayed on your phone. You can choose to accept or reject
the call. If you accept the GSM call, the WAP session closes.
If you reject the incoming call, you continue with the WAP
session.
1. To set Call waiting facility select Menu > Settings >
Call settings> OK > Call waiting > GPRS Call >
OK > On/Off > OK.
Auto redial
When enabled, your phone will automatically redial within a
set interval, if a call does not connect.
1. To enable this function select Menu > Settings >
Call settings > Auto redial > On.
OR
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sonim XP3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sonim XP3 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sonim XP3

Sonim XP3 Additional guide - English - 10 pages

Sonim XP3 Installation Guide - English - 30 pages

Sonim XP3 User Manual - German - 75 pages

Sonim XP3 User Manual - Dutch - 75 pages

Sonim XP3 User Manual - French - 69 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info