568058
3
Zoom out
Zoom in
Previous page
1/5
Next page
English SBB500ss-v3 28-Mar-2013
the clock is set to 12 hour for UK and the clock is set to 24 hour for Europe
Press and hold the Fast Button (9) for 6 seconds to enter the hour selection mode, release
the Fast Button (9) when the display shows "12 H" or "24 H". Press and release the hour
button to toggle between 12 or 24 hours. If no selection is made within 4 seconds, then the
last displayed hour format will be chosen and the display will return to the normal Time mode.
Alarm
Enable Alarms:
1) To enable Alarm 1, slide the “ALARM MODE SWITCH“ (12) to AL1 position. the alarm
indicator AL1 (1) will light up.
2) To enable Alarm 2, slide the “ALARM MODE SWITCH“ (12) to AL2 position, the alarm
indicator AL2 (17) will light up.
3) To enable both alarms, slide the ALARM SELECTOR (1) to AL2 position, the alarm
indicators AL1 (1) and AL2 (17) will light up.
To Select Wake up mode
To select the wake up mode, slide the Alarm Function Switch (8) to your desired position:-
a) BUZZ for sound b) VIB for bed shaker c) VIB/ BUZZ for both sound and bed shaker
NOTE: once the wake up mode is chosen, this will apply to both alarms.
Alarm Patterns
When the alarm is activated, alarm pattern of the buzzer / flashing display will be out of sync
with the vibrator. This means that when the buzzer / flashing display is ON, the vibrator will be
OFF and while the buzzer/ flashing display is OFF, the vibrator will be ON.
ALARM 1 - When Alarm 1 is activate, it will have 3 beeps for buzzer, then the vibrator. This
pattern is repeated until the alarm is stopped.
ALARM 2 - When Alarm 2 is activate, it will have 4 beeps for buzzer, then the vibrator. This
pattern is repeated until the alarm is stopped.
Adjusting The Alarm Duration Time
The default alarm duration time setting is 30 minutes; you may adjust the alarm duration
between 1 minute and 59 minutes as desired. To adjust the alarm duration:
• Press and hold the AL. SET button (5) for six seconds. The clock display will show the default
alarm duration as 30. Release the AL set button
Press the MIN button (10) to adjust the alarm duration to the desired setting, from 1 minute
to 59 minutes.
When the display is showing the desired alarm duration time, it will return to the normal clock
mode after 3 seconds. The new alarm duration time setting becomes the new default and
remains in the memory until you change it again.
Snooze Operation
1. When the alarm turns on in the morning you may press the SNOOZE Button (8) to stop the
alarm temporarily. The alarm will shut off for 9 minutes or for the predetermined time you
select from 1-30 minutes, and then turn on again. The snooze operation may be repeated
indefinitely until the alarm is turned off.
2. The SNOOZE function of Alarm 1 and Alarm 2 is independent of each other.
Adjusting The Snooze Time
The default snooze time setting is 9 minutes but you may adjust the snooze time between 1
minute and 30 minutes as desired. To adjust the snooze time:
• Press and hold the SNOOZE Button (8) for four seconds. The clock display will show the
default snooze time 9. Release the snooze button
Press the SLOW Button (7) to adjust the snooze time to the desired setting, from 1
minute to 30 minutes.
When the display is showing the desired snooze time, it will return to the normal clock mode
after 3 seconds. The new snooze time setting becomes the new default and remains in the
memory until you change it again.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sonic Alert SBB500 - BOMB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sonic Alert SBB500 - BOMB in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sonic Alert SBB500 - BOMB

Sonic Alert SBB500 - BOMB User Manual - German - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info