568083
2
Zoom out
Zoom in
Previous page
1/6
Next page
English from PO#22955 SB200ss-v3 093-HK093-027 27-03-2013
Test Mode:
1) Press and hold the Snooze (9) and Time Set button(8) for 3 seconds to enter the Test Mode. The display
will show "7ES7" to indicate it is in TEST Mode.
2) If within 1 minute no button is pressed, then it will exit the Test Mode and return back to the Time Mode.
3) Press any button within 1 minute (except the Snooze & Time button, which has no effect), it will exit the
Test Mode immediately.
4) While in Test Mode, sliding the Function Switch will demonstrate the different functions of the clock:
a) Function Switch at OFF, it will have a continuous "Vee" sound to indicate it is in the Test Mode.
b) Function Switch at BUZZ, it will demonstrate the buzzer sound.
c) Function Switch at VIB, it will demonstrate the vibrator.
d) Function Switch at VIB & BUZZ, it will demonstrate the buzzer sound & the vibrator.
5) After finish with the Test Mode, press any button (except the Snooze & Time buttons, which has no effect)
it will exit the Test Mode immediately.
Setting the correct time
1) Press and hold the TIME Button (8) and at the same time press the FAST Button (6) or the
SLOW button (7) to advance clock display until you have desired time.
2) The lighted dot (3) located in upper left corner of the clock display indicates the time is PM. For AM time,
this dot will not light up.
Setting the Alarm Time
Setting Alarm 1
1) Slide the ALARM SELECTOR (11) to AL1 position, the alarm indicator AL1 (1) will light up.
2) Press and hold the ALARM SET (5) button and at the same time press the “FAST“ Button (6) or the
“SLOW“ button (7) to advance clock display until you reach desired alarm setting.
3) Make sure alarm time is correctly set.
Setting Alarm 2
4) Once alarm AL1 has been set, slide ALARM SELECTOR“ (11) to AL2 position, the alarm indicator
AL2 (12) will light up.
5) Press and hold the ALARM SET (5) button and at the same time press the “FAST“ Button (6) or the
“SLOW“ Button (7) to advance clock display until you reach desired alarm setting.
Selecting 12 or 24 hours format
For Europe, the clock is set to 24 hour format, while for UK the clock is set to 12 hour format.
Press and hold the Fast Button (6) for 6 seconds to enter the hour selection mode, when the
display shows "12 H" or "24 H" release the Fast Button (6). Press and release the Fast Button
(6) to toggle between 12 or 24 hours. If no selection is made within 4 seconds, then the last
displayed hour format will be chosen and the display will return to the normal Time mode.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sonic Alert SB200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sonic Alert SB200 in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sonic Alert SB200

Sonic Alert SB200 User Manual - German - 3 pages

Sonic Alert SB200 User Manual - French - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info