Spare Parts List / Glossary
24
Item no. QuantityName Product no. Details
1.1 Use 12211 1 Plastic insert. Only supplied in conjunction with push rod (1.19) and switch nut (1.16)
1.2/3.3 Plug 12230 2 Plug to protect for end switch spindle (1.5)
1.3 Cover 12215 1 Protects limit switch spindles (1.5) and threaded spindle (1.13)
1.4 Holder 12213 2 Holder for limit switches (1.15 + 1.18)
1.5 Limit switch spindle 12212 2 These spindles are used for the adjustment of the limit switches (1.15 + 1.18)
1.6 Lock 12228 1 Locking device for cover (8) and emergency release lever (1.11)
1.7 Motor 359V000 1
1.8 Cover 12207 1 Covers and protects motor and motor board
1.9 - - -
1.10 Connecting cable 12220V001 1 Length 1 m
1.11 Emergency release lever 12203 1 Used to pull the motor from the threaded spindle, thus releasing the gate
1.12 Housing 12201 1
1.13 Threaded spindle 12208 1
1.14 Screw 12229 5 Secures cover (3) and protective tube (1.17)
1.15 Limit switch / “open” 12214 1 Limit switch for gate position “OPEN”; determines the max. opening angle.
1.16 Switching nut - - Actuates the limit switches (1.15 + 1.18).
Only supplied in conjunction with push rod (1.19) and insert (1.1)
1.17 Protective tube 12200 1 Protects the drive mechanism and holds the switching nut.
1.18 Limit switch / “close” 12239 1 Limit switch for gate position “CLOSE”, determines closing angle of gate.
1.19 Push rod, complete 3207 1 Factory-mounted, with insert (1.1) and switching nut (1.16)
1.20 Seal 12218 2
1.21 Sliding ring 12217 1 Front bearing of push rod (1.19)
1.22 Scraper 12216 1 Cleans push rod (1.19), removes deposits
1.23/3.2 Hexagon nut 12221 2
1.24/3.1 Screw 32046 2
1.25 Motor circuit board 12227 1
1.26 Inlay 12220V001 1
1.27 Flange sleeve 12226 2
1.28 Inlay with sleeve 12205 1
1.29 Fuse 12231 4
1.30 Washer 12225 2
1.31 Inlay 12204 1
1.32 O-ring 12224 2 For insertion in inlay (1.27)
1.33 Seal 12206 1 Seal of cover (8)
1.34 Spring 12265 2 from serial no. SRL-3003574
1.35 Circlip 12223 1
1.36 Stop disk 12202 1
1.37 Flange sleeve 12222 1 Friction bearing with flange
1.38 Friction bearing 12244 1
1.39 Stop disk 12243 1 Friction bearing for forces in direction gate “CLOSE”
1.40 Stop disk 12242 1
2.1 Housing 12270 1
2.2 Cable threaded coupling M20 - 1
- Threaded coupling M20 30016 1
- Counter nut M20 30018 1
2.3 Cable threaded coupling M16 - 3
- Threaded coupling M16 30015 1
- Counter nut M16 30017 1
2.4 Control (TorMinal connection) 12269V000 1
2.5 Holding plate for transformer 12232 1
2.6 Screw 3.5 x 9.5 20064 8
2.7 Annular transformer core 12219V000 1
2.8 Screw 5.5 x 50 12240 1
2.9 868 MHz radio receiver module 7000V000 1
- 434 MHz radio receiver module 7080V000 1 no picture
- 40 MHz radio receiver module 12247V000 1 no picture
4 Fittings / post 32063 1 Secure drive mechanism to post.
The fittings can be welded or fixed with screws.
5 Fittings / gate wing 32065 1 Secure drive mechanism to gate wing.
The fittings can be welded or fixed with screws.
Remote control transmitter 4020 Transmits pulse to open or close the gate
Operating range Area travelled by the gate during operation (opening/closing)
Main closing edge
Other closing edges Bottom edge of the gate and edge at the hinged side
Force tolerance
Soft run
Intermediate stop Upon certain signals, the gate is stopped (during both closing and opening).
Upon the next signal, the gate moves in reverse direction.
