680827
87
Zoom out
Zoom in
Previous page
1/96
Next page
87
S10564-00001_Rev-A_EN
16. Placing out of operation, storage and disposal
16.1 Placing the operator out of
operation and disassembly
Follow the basic safety instructions listed below.
People under the influence of drugs, alcohol, or
medications that can influence their ability to react may
not work on the operator.
The disassembly of the operator may only be performed
by a qualified specialist.
This installation and operating manual must be read,
understood and complied with by the qualified specialist
who disassembles the operator.
DANGER
Danger if not observed!
If safety instructions are not observed,
serious injury or death may result.
All safety information must be complied
with.
DANGER
Danger due to electric current!
Contact with live parts may result in
electric current owing through the
body.
Electric shock, burns or death will
result.
All disassembly work on electrical
components may only be carried out by
a trained electrician.
The operator must be disconnected
from the mains voltage before
disassembly.
If a battery pack is connected,
disconnect it from the wall control unit.
Then check that the operator is
disconnected from the power supply
and secure it from switching on again.
WARNING
Danger of falling!
Unsafe or defective ladders may tip and
cause serious or fatal accidents.
Use only a non-slip, stable ladder.
Ensure that ladders are safely
positioned.
WARNING
Danger of tripping and falling!
Unsafely positioned parts such as
packaging, operator parts or tools may
cause trips or falls.
Keep unnecessary items away from
the disassembly area.
Place all parts where no persons are
likely to trip or fall over them.
General workplace guidelines must be
observed.
WARNING
Danger due to optical radiation!
Looking into an LED at short range for
an extended period may cause optical
glare.
This may temporarily reduce vision. This
may cause serious or fatal accidents.
Do not look directly into a LED.
WARNING
Danger due to hot surfaces!
After frequent operation parts of the
carriage or the control unit may become
hot. If the cover is removed and hot
parts are touched, they may cause
burns.
Allow the operator to cool before
removing the cover.
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9110 Tiga at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9110 Tiga in the language / languages: English as an attachment in your email.

The manual is 28,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9110 Tiga

Sommer S 9110 Tiga User Manual - German - 96 pages

Sommer S 9110 Tiga User Manual - Dutch - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info