680783
62
Zoom out
Zoom in
Previous page
1/88
Next page
62
S10931-00001_Rev-D_EN
11. Connections and special functions of the wall
control unit
ACCU
Fig. 5
5. Place the control unit cover on the bottom of the wall
control unit and plug the connection cable for the
accumulator into the ACCU slot.
6. Set DIP switch 3 on the wall control unit to "ON."
7. Plug the connection cable for the membrane
keyboard into the circuit board, see chapter
"7.3 Light and control unit cover of the wall
control unit."
8. Place the control unit cover on the wall unit and
screw on the light cover.
9. Press the button on the handheld transmitter to
check the operator function.
The operator is powered by the accumulator.
Operator opens or closes the door at reduced
speed.
10. Supply the operator with the mains voltage.
Check that the power supply is connected.
Removing the accumulator
The accumulator is removed in the reverse order,
see chapter "11.12 Installing and removing the
accumulator."
DANGER
Danger of hazardous substances!
Improper storage, use or disposal of
accumulators, batteries and operator
components are dangerous for the
health of humans and animals. Serious
injury or death may result.
Accumulators and batteries must be
stored out of the reach of children and
animals.
Keep accumulators and batteries away
from chemical, mechanical and thermal
inuences.
Do not recharge old accumulators and
batteries.
Components of the operator as well as
old accumulators and batteries must not
be disposed of with household waste.
They must be disposed of properly.
NOTE
Dispose of all parts in accordance with
local or national regulations to avoid
environmental damage.
INFORMATION
All operator components that have been
taken out of service must not be disposed
of with household waste, as they contain
hazardous substances. The components
must be disposed of correctly at an
authorised recycling centre. The local and
national regulations must be observed.
INFORMATION
Old accumulators and batteries must not
be disposed of with household waste as
they contain hazardous substances. These
must be disposed of properly at municipal
collection points or in containers provided
by dealers. National guidelines must be
observed.
INFORMATION
If a photocell is retrotted on a pro-
grammed system, the control unit must
be reset, see Chapter "10.13 Performing
a reset."
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9110 pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9110 pro in the language / languages: English as an attachment in your email.

The manual is 10,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9110 pro

Sommer S 9110 pro User Manual - German - 88 pages

Sommer S 9110 pro User Manual - Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info