680783
59
Zoom out
Zoom in
Previous page
1/88
Next page
59
S10931-00001_Rev-D_EN
INFORMATION
When starting and during programming
of the photocell, it must not be triggered
by persons or objects.
INFORMATION
If a photocell is used as a frame photocell
on the door, move the door to the centre
position.
Frame photocell
1. Install the frame photocell in the frame, see separate
"Frame photocell” installation instructions.
2. Align the frame photocell and connect it to the wall
control unit.
3. Initial operation is performed as described in chapter
"9. Initial operation."
When the door passes the frame photocell,
theillumination power of the operator lighting
is reduced.
If the illumination power is not reduced, the frame
photocell must be realigned. The control unit must
also be reset.
During initial operation, the operator learns the
exact position of the frame photocell in order to
blank it out in normal mode shortly before reaching
the door.
4. Check the frame photocell function.
11.8 Wallstation
Other functions are available with the Wallstation.
For example, a travel command can be executed, the
lighting can be switched on or off or the operator can
be locked. The selection of the locked areas can be
changed via SOMlink. The connection features a polarity-
protected 2-wire bus. The Wallstation is only supported
by operators from 07/2017.
WL
24V/1A
Signal
COM
GND
+24V
O
12
WL
2
4V
/
1
A
Signal
CO
M
G
ND
+
24
V
al
1
2
Fig. Button connection
INFORMATION
The connection features a polarity-
protected 2-wire bus.
Installing the Wallstation
See the separate instructions for the "Wallstation" for
installation.
The following conditions must be met for installation of
the Wallstation:
a second separate access point
a suitable position with minimum height of 1.6 m.
1. Install the Wallstation.
2. The cable from the Wallstation to the wall control
unit must be firmly routed and secured to prevent
displacement.
3. Connect the Wallstation to the button terminal.
4. The power-saving mode must be deactivated. To do
this, set DIP switch 3 on the wall control unit to "ON."
1
3
2
Fig. Wallstation
Functions of the buttons
Opening, stopping and closing the door
Turning the lighting on and off
Locking or unlocking the operator
11. Connections and special functions of the wall
control unit
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9110 pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9110 pro in the language / languages: English as an attachment in your email.

The manual is 10,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9110 pro

Sommer S 9110 pro User Manual - German - 88 pages

Sommer S 9110 pro User Manual - Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info