680555
74
Zoom out
Zoom in
Previous page
1/80
Next page
74
46900V001_Rev-D_EN
17. Taking out of operation, storage and disposal
17.1 Taking the operator out of
operation and disassembly
Follow the basic safety instructions listed below.
People under the influence of drugs, alcohol, or
medications that can influence their ability to react may
not work on the operator.
The disassembly and disposal of the operator may only
be performed by a qualified specialist.
This installation and operating manual must be read,
understood and complied with by the qualified specialist
who disassembles the operator.
DANGER
Danger if not observed!
If safety instructions are not observed,
serious injury or death may result.
All safety instructions must be complied
with.
DANGER
Danger due to electric current!
Contact with live parts may result
in electric current owing through
the body. Electric shock, burns or death
will result.
All disassembly work on electrical
components may only be carried out
by a trained electrician.
Disconnect the power plug before
disassembling the operator.
If an accumulator is connected,
disconnect it from the control unit.
Check that the operator is not live.
Secure the operator against being
switched back on.
WARNING
Danger of falling!
Unsafe or defective ladders may tip and
cause serious or fatal accidents.
Use only a non-slip, stable ladder.
Ensure that ladders are safely
positioned.
WARNING
Danger of tripping and falling!
Unsafely positioned parts such as
packaging, operator parts or tools may
cause trips or falls.
Keep the installation area free of
unnecessary items.
Place all parts where no-one is likely to
trip or fall over them.
The general workplace guidelines must
be observed.
WARNING
Danger due to optical radiation!
Looking into an LED at short range for
an extended period may cause optical
glare. This may temporarily reduce
vision. This may cause serious or fatal
accidents.
Never look directly into an LED.
WARNING
Danger due to hot surfaces!
After frequent operation parts of the
motor carriage or the control unit may
become hot. If the cover is removed and
hot parts are touched, they may cause
burns.
Allow the operator to cool down before
removing the cover.
WARNING
Risk of eye injury!
Eyes and hands may be seriously
injured by chips when removing screws.
Wear safety glasses.
WARNING
Risk of injury in the head region!
Impact with suspended objects may
cause serious abrasions and cuts.
You must wear a safety helmet when
disassembling suspended parts.
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9110 base at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9110 base in the language / languages: English as an attachment in your email.

The manual is 8,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9110 base

Sommer S 9110 base Installation Guide - German - 80 pages

Sommer S 9110 base Installation Guide - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info