680556
20
Zoom out
Zoom in
Previous page
1/80
Next page
20
46900V001_Rev-D_EN
5. Declaration of Installation
Declaration of Installation
for the installation of an incomplete machine
in accordance with the Machinery Directive 2006/42/EC, Annex II, Section 1 B
SOMMER Antriebs- und Funktechnik GmbH
Hans-Böckler-Straße 21-27
73230 Kirchheim
Germany
hereby declares that the control units
S 9050 base; S 9060 base; S 9080 base; S 9110 base; S 9050 base+ S 9060 base+; S 9080 base+; S 9110 base+;
S 9050 pro; S 9060 pro; S 9080 pro; S 9110 pro; S 9050 pro+; S 9060 pro+; S 9080 pro+; S 9110 pro+
have been developed, designed and manufactured in conformity with the:
Machinery Directive 2006/42/EC
Low Voltage Directive 2014/35/EU
Electromagnetic Compatibility Directive 2014/30/EU
RoHS Directive 2011/65/EU
The following standards were applied:
EN ISO 13849-1, PL "C" Cat. 2 Safety of machines - safety-related parts of controls - Part 1: General
design guidelines
EN 60335-1, where applicable Safety of electrical appliances/operators for doors
EN 61000-6-3 Electromagnetic compatibility (EMC) - interference
EN 61000-6-2 Electromagnetic compatibility (EMC) - interference resistance
EN 60335-2-95 General safety requirements for household and similar electrical appliances
- Part 2: Particular requirements for operators for vertically moving garage
doors for residential use
EN 60335-2-103 General safety requirements for household and similar electrical appliances
- Part 2: Special requirements for operators for gates, doors and windows
The following requirements of Annex 1 of the Machinery Directive 2006/42/EC are met:
1.1.2, 1.1.3, 1.1.5, 1.2.1, 1.2.2, 1.2.3, 1.2.4, 1.2.5, 1.2.6, 1.3.1, 1.3.2, 1.3.4, 1.3.7, 1.5.1, 1.5.4, 1.5.6, 1.5.14, 1.6.1,
1.6.2, 1.6.3, 1.7.1, 1.7.3, 1.7.4
The special technical documents have been prepared in accordance with Annex VII Part B and are submitted
electronically to the regulators on request.
The operator may only be used:
incombinationwithdoortypesinthereferencelistwhichcanbefoundundercertications.
www.sommer.eu
The incomplete machine is intended for installation in a door system only to form a complete machine as defined by
the Machinery Directive 2006/42/EC. The door system may only be put into operation after it has been established
that the complete system complies with the regulations of the above EC Directive.
The undersigned is responsible for compilation of the technical documents.
Kirchheim, 20-04-2016
i.V.
Jochen Lude
Responsible for documents
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9110 base plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9110 base plus in the language / languages: English as an attachment in your email.

The manual is 8,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9110 base plus

Sommer S 9110 base plus Installation Guide - German - 80 pages

Sommer S 9110 base plus Installation Guide - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info