680826
38
Zoom out
Zoom in
Previous page
1/96
Next page
38
S10564-00001_Rev-A_EN
6. Installation
Observe the maximum distance between the wall
control unit and power socket of 0.6 m.
The wall control unit must be installed at a height of
at least 1.6 m.
Fig. 2
2. Loosen the four screws of the control unit housing
and remove the cover.
235mm
16
0 mm
Fig. 3: Installation example
WARNING
Risk of eye injury!
Chips ying when drilling may cause
serious injuries to eyes and hands.
Wear safety glasses when drilling.
3. Transfer the fixing points to the substructure.
Drill four holes,
Ø 6 x 50 mm deep.
Insert the four anchor fittings.
Affix the wall control unit with four screws, align the
unit and firmly tighten the screws.
4. Securely lay the control cable of the plug-in unit
up to the wall control unit and secure to prevent
displacement.
50
170
Fig. 5
5. Lead the control cable into the wall control unit
through the cable inlet.
Shorten the control cable to no more than 220 mm
in length. Uncover the last 50 mm and strip the wires.
gn
rd
Fig. 6
6. Lay the control cable up to the gn/rd terminal.
Connect the green wire of the control cable to the
gn terminal.
Connect the red wire of the control cable to the
rd terminal.
7. Close the housing in reverse order.
Mounting of the operator is complete.
You can find other connection options such as buttons or
warning light in Chapter "11. Connections and special
functions of the wall control unit".
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9080 Tiga at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9080 Tiga in the language / languages: English as an attachment in your email.

The manual is 28,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9080 Tiga

Sommer S 9080 Tiga User Manual - German - 96 pages

Sommer S 9080 Tiga User Manual - Dutch - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info