680826
28
Zoom out
Zoom in
Previous page
1/96
Next page
28
S10564-00001_Rev-A_EN
6.3 Installation of the operator system
The operator may only be installed if the installation
requirements and dimensions are correct.
NOTE
Specify the position for mounting the
operator on the door. Manually open and
close the door several times. The door
must be moved easily.
A manual movement force of 150 N is
applicable for private garage doors and
260 N for commercial doors.
The value is applicable for the entire life of
the door. The door must also be maintained
and inspected as specied by the door
manufacturer.
Selection of the installation version
The scope of delivery offers the option of implementing
the following installation versions.
Check your situation and conditions and select the
optimal installation version for you.
Installation situation A, B and C
Fig. Installation versions A, B and C
Variant A
This version is selected if there is a separate entrance
to the garage. The wall control unit is assembled near a
power socket. The control cable is led at the rear end of
the track, see Chapter "6.4 Installation of the operator
system for installation versions A and B".
Version B
This version is selected when an existing device is being
replaced by a new one and there is already a power
socket or other control lines to buttons or photo eyes in
this area. The wall control unit on the ceiling is assembled
in the rear area of the track. The control cable of the
plug-in unit is also led out at the rear end of the track, see
Chapter "6.4 Installation of the operator system for
installation versions A and B".
Version C
This version is selected when a power socket is located
near the door opening and can be used for the wall
control unit.
The control cable is led out at the front end of the track,
see Chapter "6.5 Installation of the operator system
for installation version C".
6. Installation
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9080 Tiga at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9080 Tiga in the language / languages: English as an attachment in your email.

The manual is 28,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9080 Tiga

Sommer S 9080 Tiga User Manual - German - 96 pages

Sommer S 9080 Tiga User Manual - Dutch - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info