680826
25
Zoom out
Zoom in
Previous page
1/96
Next page
25
S10564-00001_Rev-A_EN
6. Installation
WARNING
Danger of crushing and shearing!
If the door moves with persons or
animals in the movement area, crushing
and shearing injuries may be caused
by the mechanism and safety edges of
the door.
Only use the operator in direct view of
the door.
All danger zones must be visible during
the entire door operation.
Always keep the moving door in sight.
Persons or animals must not be in the
range of movement of the door.
Never put your hand near the door
or moving parts when it is moving.
In particular, do not reach into the
moving push arm.
Do not reach into the ceiling mounting
unit when the carriage runs along the
track.
Only pass through the door only once it
is completely open and the trafc light
has given access authorisation.
WARNING
Danger of tripping and falling!
Unsafely positioned parts such as
packaging, operator parts or tools may
cause trips or falls.
Keep unnecessary items away from the
installation area.
Place all parts where no persons are
likely to trip or fall over them.
General workplace guidelines must be
observed.
WARNING
Risk of eye injury!
Chips ying when drilling may cause
serious injuries to eyes and hands.
Wear safety glasses when drilling.
CAUTION
Risk of injury to hands!
Rough metal parts may cause abrasions
and cuts when picked up or touched.
Wear safety gloves when deburring or
performing similar work.
NOTE
If the ceiling and walls are not stable,
parts of the ceiling, walls or the operator
may fall. Objects may be damaged.
Ceiling and walls must be stable.
NOTE
To prevent damage to the door or operator,
use only approved fastening materials
such as wall plugs or screws.
The fasteners must be suitable to the
material of the ceiling and walls.
This applies particularly for prefabricated
garages.
INFORMATION
Ask your specialist dealer if you require
additional installation accessories for
different installation or attachment
situations.
6.2 Preparation for installation
Before installation, you must check whether the operator
is suitable for the door, see also Chapter "3.9 Technical
data".
The operator may only be used:
in combination with door types in the reference list
which can be found at:
http://som4.me/cgdo
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9080 Tiga at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9080 Tiga in the language / languages: English as an attachment in your email.

The manual is 28,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9080 Tiga

Sommer S 9080 Tiga User Manual - German - 96 pages

Sommer S 9080 Tiga User Manual - Dutch - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info