680782
43
Zoom out
Zoom in
Previous page
1/88
Next page
43
S10931-00001_Rev-D_EN
The LEDs of the operator lighting remain steady.
Operator is programmed and ready for use.
INFORMATION
The motor carriage stops if the door is dif
cult to move. The door mechanism must
be checked, see Chapter "9.3 Detecting
obstacles during the force programming
run."
It may be necessary to adjust the end positions.
See Chapter "9.4 Mechanical adjustment of the end
positions."
9.3 Detecting obstacles during the
force programming run
If the door detects an obstacle during the OPEN and
CLOSE door movements and the force programming run
cannot be completed, the door stops.
NOTE
Check the travel path, mechanism, spring
tension and the weight balance to prevent
damage to the door system.
1. Press and hold button 1 on the handheld
transmitter.
The motor carriage moves briey and then moves
continuously in the door CLOSE direction until the
desired end position has been reached.
2. Release button 1 on the handheld transmitter.
3. Fine adjustment:
Press and hold button 1 on the handheld transmitter
until the motor carriage moves briefly.
Release button 1 on the handheld transmitter.
4. The process can be repeated until the desired end
position is reached.
Press button 1 on the handheld transmitter briefly (<
1 second) to save the door CLOSE end position.
The motor carriage starts the automatic force
programming run to the door OPEN end position.
The door starts the automatic door CLOSE force
programming run.
If an obstacle is detected again, the motor carriage stops
and reverses a short distance.
1. Press and hold button 1 on the handheld
transmitter.
The motor carriage starts without jerking, because
the end position of the door is already saved.
The motor carriage moves to the end position.
2. Release button 1 on the handheld transmitter.
9. Initial operation
3. Press button 1 on the handheld transmitter briefly.
Automatic force programming runs start again.
On completion of the force programming runs, the
motor carriage automatically moves to the door
OPEN end position.
The LEDs of the operator lighting remain steady.
Operator is programmed and ready for use.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9080 pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9080 pro in the language / languages: English as an attachment in your email.

The manual is 10,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9080 pro

Sommer S 9080 pro User Manual - German - 88 pages

Sommer S 9080 pro User Manual - Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info