680554
65
Zoom out
Zoom in
Previous page
1/80
Next page
65
46900V001_Rev-D_EN
NOTE
In an emergency release, the door could
open or close by itself surprisingly quickly
due to a broken spring or incorrect setting
of the weight balancing.
Damage to the door system could occur.
NOTE
After the operator is locked back in, move
the door into the door OPEN end position.
Otherwise the guide idler will be hit with
too much force.
NOTE
Objects in the movement area of the door
may be jammed and damaged.
Objects must not be in the range of
movement of the door.
INFORMATION
It can be locked and released in any door
position.
1. Disconnect the operator from the mains voltage.
Check it is disconnected from the power supply.
“clic
Fig. 1 Fig. 2
2. Pull once on the emergency release cord.
The motor carriage is released.
Door can be moved by hand.
14. Operation
3. Pull the emergency release cord once more.
The motor carriage is locked.
The door can only be moved by the operator.
4. Connect the operator to the mains voltage.
Check that the power supply is connected.
5. Give the operator a command.
Afterapowerfailure,therstpulseoftheoperator
is always in the door OPEN direction.
The operator must drive completely to the door
OPEN end position.
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9080 base plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9080 base plus in the language / languages: English as an attachment in your email.

The manual is 8,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9080 base plus

Sommer S 9080 base plus Installation Guide - German - 80 pages

Sommer S 9080 base plus Installation Guide - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info