680825
3
Zoom out
Zoom in
Previous page
1/96
Next page
3
S10564-00001_Rev-A_EN
Table of contents
9. Commissioning 42
9.1 Safety information for commissioning 42
9.2 Initial operation 43
9.3 Detecting obstacles during force programming
run 45
9.4 Mechanical adjustment of the end positions 46
9.5 Attaching information sign and warning signs 46
10. Connections and special functions of
the carriage 47
10.1 Carriage circuit board 47
10.2 Connection options on the carriage 48
10.3 Reducing illumination power of LEDs 49
10.4 Explanation of radio channels 49
10.5 Programming the transmitter 49
10.6 Information on Memo 49
10.7 Cancelling programming mode 50
10.8 Deleting a transmitter button from the radio
channel 50
10.9 Deleting transmitter completely from
the receiver 50
10.10 Deleting radio channel in the receiver 50
10.11 Deleting all radio channels in the receiver 51
10.12 Programming a second transmitter by radio
(HFL) 51
10.13 Resetting the control unit 51
10.14 Setting the DIP switches on the carriage 52
10.15 Setting the automatic closing function 52
10.16 Open holding time 53
10.17 Pre-warning time 54
10.18 Priority switching 54
10.19 Shortened open holding time for driving through
the photo eye 54
10.20 Clearing time 54
10.21 12 V output 54
10.22 Setting partial opening 55
10.23 Deleting partial opening 55
10.24 Slip door safety device 55
10.25 SOMlink 56
11. Connections and special functions of the
wall control unit 57
11.1 Wall control unit circuit board 57
11.2 Connection options to the wall control unit 59
11.3 Setting the DIP switches on the wall
control unit 61
11.4 Information on Memo tiga 62
11.5 Multi-function relay - MUFU 1 63
11.6 Relay 63
11.7 Photo eye and frame photo eye 63
11.8 Connection options for control device 65
11.9 Safety terminal 65
11.10 Installing and removing battery pack 66
1. About this installation and operating manual 5
1.1 Storage and circulation of the installation and
operating manual 5
1.2 Important for translations 5
1.3 Description of the product type 5
1.4 Target groups of the installation and operating
manual 5
1.5 Explanation of warning symbols and notes 5
1.6 Special warnings, hazard signs and mandatory
signs 6
1.7 Information regarding the depiction of text 8
1.8 Intended use of the operator 8
1.9 Improper use of the operator 9
1.10 Qualifications of personnel 9
1.11 For the user 10
2. General safety instructions 11
2.1 Basic safety instructions for operation 11
2.2 Additional safety information for the radio remote
control 13
3. Description of function and product 14
3.1 The operator and its mode of operation 14
3.2 Safety equipment 15
3.3 Definitions 16
3.4 Operator response with factory settings 17
3.5 Product designation 18
3.6 Explanation of tool symbols 18
3.7 Scope of delivery 19
3.8 Dimensions 20
3.9 Technical data 20
3.10 Door types and accessories 21
4. Tools and protective equipment 22
4.1 Required tools and personal protective
equipment 22
5. Declaration of installation 23
6. Installation 24
6.1 Important information on installation 24
6.2 Preparation for installation 25
6.3 Installation of the operator system 28
6.4 Installation of the operator system for
installation versions A and B 29
6.5 Installation of the operator system for
installation version C 31
6.6 Installation on the door 33
6.7 Installing wall control unit 37
7. Removing and fastening covers 39
7.1 Cover of carriage 39
7.2 Cover hood of wall control unit 40
8. Electrical connection and special functions 41
8.1 Connection to mains voltage 41
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9060 Tiga at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9060 Tiga in the language / languages: English as an attachment in your email.

The manual is 28,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9060 Tiga

Sommer S 9060 Tiga User Manual - German - 96 pages

Sommer S 9060 Tiga User Manual - Dutch - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info