680828
73
Zoom out
Zoom in
Previous page
1/100
Next page
73
S10557-00001_Rev-A_EN
The door opens completely at a pulse from the
transmitter.
If the operator does not reverse, a position reset
is required, see Chapter "10.13 Resetting the
control unit".
The positions and the forces must be
reprogrammed.
12.2 Handover of door system
The qualified specialist must instruct the user:
on the operation of the operator and its dangers
on the handling of the emergency release
on regular maintenance which the user can execute
on troubleshooting, see Chapter
"15. Troubleshooting"
The user must be informed about which work must only
be performed by a qualified specialist:
installation of accessories
settings
regular maintenance except that described in
Chapter "14. Care and maintenance" and which
can be performed by the user.
repairs
troubleshooting, except that described in Chapter
"15. Troubleshooting“ and which must be
performed by a qualified specialist.
This installation and operating manual, the Declaration of
Conformity created for the door system and the handover
protocol must be given to the user.
The following is available
handover protocol for the operator
Declaration of Conformity
At:
http://som4.me/konform
12. Function test/Final test
INFORMATION
After installation of the operator, the
person responsible for the installation
of the operator must complete an EC
declaration of conformity for the door
system in accordance with Machinery
Directive 2006/42/EC and apply the CE
mark and a type plate. This documentation
and the installation and operating manual
are retained by the owner. Including if
the operator is retrotted to a manually
operated door.
INFORMATION
Reversing: The operator stops on contact
with an obstacle and then moves a bit
in the opposite direction to release the
obstacle.
In the automatic closing function the
door opens completely if an obstacle is
detected.
INFORMATION
The operating forces can be modied and
adjusted with SOMlink and a smartphone.
For more information ask your specialist
dealer.
The operator must reverse in the door OPEN direction
when it is loaded with a weight of 20 kg. The weight is
fastened in the centre of the bottom edge of the door for
this purpose.
The door must reverse during the door CLOSE
movement if it hits a 50-mm-high obstacle.
1. Open the door with the operator.
2. Place a 50-mm-high object in the centre of the door.
50 mm
Fig. Example: Obstacle recognition on sectional door
3. Close the door with the operator.
If the door hits an obstacle, the operator must
immediately reverse.
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9060 Tiga plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9060 Tiga plus in the language / languages: English as an attachment in your email.

The manual is 10,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9060 Tiga plus

Sommer S 9060 Tiga plus User Manual - German - 100 pages

Sommer S 9060 Tiga plus User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info