680828
38
Zoom out
Zoom in
Previous page
1/100
Next page
38
S10557-00001_Rev-A_EN
6. Installation
Fig. 2
2. Loosen the six screws of the control unit housing
and fold the cover to the side.
188 mm
338 mm
Fig. 3: Installation example
WARNING
Risk of eye injury!
Chips ying when drilling may cause
serious injuries to eyes and hands.
Wear safety glasses.
3. Transfer the fixing points to the substructure.
Drill four holes
(Ø 6 x 40 mm deep).
Insert the four anchor fittings.
Affix the wall control unit with four screws and four
washers, align the unit and firmly tighten the screws.
4. Securely lay the control cable of the plug-in unit
up to the wall control unit and secure to prevent
displacement.
50 mm
300 mm
Fig. 5
5. Lead the control cable into the wall control unit
through the cable inlet.
Shorten the control cable to no more than 350 mm in
length. Uncover the last 50 mm and strip the wires.
Fig. 6
6. Lay the control cable up to the gn/rd terminal.
Connect the green wire of the control cable to the
gn terminal.
Connect the red wire of the control cable to the
rd terminal.
7. Close the housing in reverse order.
You can find other connection options such as buttons or
warning light in Chapter "11. Connections and special
functions of the wall control unit".
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9060 Tiga plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9060 Tiga plus in the language / languages: English as an attachment in your email.

The manual is 10,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9060 Tiga plus

Sommer S 9060 Tiga plus User Manual - German - 100 pages

Sommer S 9060 Tiga plus User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info