680828
16
Zoom out
Zoom in
Previous page
1/100
Next page
16
S10557-00001_Rev-A_EN
3. Description of function and product
3.3 Definitions
Programming
The operator programs the path and force required to
open and close the door.
The operator saves these values. The values are saved
even if the power supply fails.
Door OPEN
The door opens or is open.
Door CLOSE
The door closes or is closed.
Interior (IN)
The side in the interior of the garage or car park.
Exterior (OUT)
The side in the exterior of the garage or car park.
Light signals of the trafc light
Access authorisation is indicated by the traffic light signal
red and green phases.
Red traffic light for interior RED INSIDE
Green traffic light for interior GREEN INSIDE
Red traffic light for exterior RED OUTSIDE
Green traffic light for exterior GREEN OUTSIDE
Request side, interior or exterior
A command is given from this side.
Opposite side, interior or exterior
This side is opposite the request side.
Command from the interior
Button or radio signal give a command to open the
door from the interior. If the door is closed or is in the
door OPEN end position, the green phase is executed,
thereby granting authorisation for drive-through from the
interior. The opposite side gets the red phase.
Command from the exterior
Button or radio signal give a command to open the
door from the exterior. If the door is closed or is in the
door OPEN end position, the green phase is executed,
thereby granting authorisation for drive-through from the
exterior. The opposite side gets the red phase.
Pre-warning time
This phase affects the time before opening or closing.
The red traffic light flashes on both sides. The warning
light and the operator lighting of the carriage also flash.
The operator movement is thereby announced. The door
area must be cleared.
Open holding time
The door remains open in this phase. The request side
gets the green phase. The opposite side gets the red
phase. The door can only be opened but not closed by
a command from a button or hand-held remote control.
While the door is being opened, it cannot be stopped by
a command.
Example: If a command is sent while the operator is
closing automatically, it opens completely and the open
holding time is reset.
Clearing time
This phase affects the time after the open holding
time has run out. The red traffic light lights up on both
sides. The operator lighting of the carriage also flashes.
The operator movement is thereby announced. The door
area must be cleared.
SOMlink
SOMlink makes it possible for qualified specialists
to change many functions and settings on the door
operator. These include force and speed values as well
as operating parameters and other convenient functions.
If you would like to make changes, contact your specialist
dealer.
Multi-function relay (MUFU)
The multi-function relay is a potential-neutral changeover
contact. The multi-function relay can be configured for
other settings using the SOMlink, a smartphone or a
Memo tiga attached to the wall control unit at the factory.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9060 Tiga plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9060 Tiga plus in the language / languages: English as an attachment in your email.

The manual is 10,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9060 Tiga plus

Sommer S 9060 Tiga plus User Manual - German - 100 pages

Sommer S 9060 Tiga plus User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info