Manual Sommer S 9060 pro plus (page 79 of 88) (English)

680779

Zoom out

Zoom in

1/88

S10931-00001_Rev-D_EN

16. Troubleshooting

Problem Possible cause Test/check Remedy

MEMO device type error

• System error • All four LEDs blink cyclically

for a long time and then go out

for a short time. If voltage is

present, the operator lighting

ofthemotorcarriageashes

an additional four times.

• Memo can be deleted via the

Radio button, see chapter

"10.11 Deleting all radio

channels in the receiver"

Operator stops the

door during closing

and opens it partially or

completely.

• Door has detected an

obstacle

• Check whether there are

any objects in the movement

range of the door

• Remove the object

• If necessary, have door

mechanism checked and set by

aqualiedspecialist

• Photocell was

interrupted

• Check LEDs on photocell • Remove obstacle

• Photocell defective

or misaligned

• Align photocell

• Check wiring

• If necessary, have defective

photocell replaced

Operator stops while

the door is opening

• Door has detected

an obstacle

• Check whether there are

any objects in the movement

range of the door

• Check the weight balance of

the door - it must run smoothly

• Remove obstacle

• If necessary, have door

mechanism checked and repaired

byaqualiedspecialist

Operator lighting or the

Lumi pro

supplemental

lighting does not

function

• Operator lighting

defective

• Lumi pro

supplemental lighting

defective

• Have motor carriage replaced with

anewonebyaqualiedspecialist

• If necessary, replace Lumi pro

supplemental lighting

Speed varies while

opening and closing the

door

• Track dirty • Clean with a moist lint-free cloth,

see chapter "15.3 Care"

• Chain tightened

incorrectly

• Tighten the chain, see chapter

"6.4 Installing the operator

system for installation variants

A and B" or "6.5 Installing the

operator system for installation

variant C"

16.5 Replacing the motor carriage

The instructions for "Disassembling the motor

carriage" can be downloaded from SOMMER at:

www.sommer.eu

If applicable, save the existing settings on the existing

motor carriage via SOMlink and a WiFi-enabled device.

The settings can be transferred to the new motor

carriage later. The new motor carriage is in delivery

condition from the factory. After replacing the motor

carriage, make sure that used accessories have been

transferred to the new motor carriage.

Initial operation must be repeated, and the special

functions of the motor carriage must be reset, see

chapter "9. Initial operation" and "10. Connections

and special functions of the motor carriage."

Handheld transmitters which are used must also be

reprogrammed, see Chapter "10.5 Programming the

transmitter." On the other hand, handheld transmitters

do not have to be programmed if the Memo accessory

part has already been used.

After successful initial operation, run a function test and

a final test, see chapter "13. Function test and final

test."

INFORMATION

Save the existing settings of the motor

carriage with the help of SOMlink and

a WiFi-enabled device. After the new

motor carriage has been inserted,

reinstall the data.

après une coupure de courant d une semaine la porte ne ferme plus complètement. comment faire un réset sur un moteur sommer s pro + merci Submitted on 5-10-2022 at 22:16
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9060 pro plus in the language / languages: English as an attachment in your email.

The manual is 10,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9060 pro plus

Sommer S 9060 pro plus User Manual - German - 88 pages

Sommer S 9060 pro plus User Manual - Dutch - 88 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sommer S 9060 pro plus Manual

Product: