680551
41
Zoom out
Zoom in
Previous page
1/80
Next page
41
46900V001_Rev-D_EN
10. Connections and special functions of the motor
carriage
10.3 Reducing illumination power of
LEDs
WARNING
Danger due to optical radiation!
Looking into an LED at short range for
an extended period may cause optical
glare. This may temporarily reduce
vision. This may cause serious or fatal
accidents.
Never look directly into an LED.
The illumination power of the LEDs can be reduced
during adjustment work by pressing the reset button or
radio button once briefly.
1. Press the radio or reset button once briefly.
Illumination power of LEDs reduced.
10.4 Explanation of the radio channels
LED Radio
channel
Setting/function
1 CH 1 Pulse mode
2 CH 2 Partial opening or lighting
function
3 CH 3 Defined OPEN
4 CH 4 Defined CLOSE
10.5 Programming the transmitter
RADIO
RESET
CH1
CH2
CH3
CH4
STATUS
ON
1
2
3
4
Fig. 1
INFORMATION
If no transmission command is received
within 30 seconds after pressing the radio
button, the radio receiver switches to
normal mode.
1. Press the radio button repeatedly to select the
required radio channel.
LED
1 x 2 x 3 x 4 x
CH 1
CH 2
CH 3
CH 4
2. Press the desired button on the transmitter until the
previously selected LED (CH 1, CH 2, CH 3, CH 4)
is off.
LED goes out - programming is complete.
The transmitter has transferred the radio code to
the radio receiver.
3. Repeat the above steps to program additional
transmitters.
INFORMATION
Further transmitters cannot be
programmed if all memory positions of
the handheld transmitter are occupied.
If the memory capacity has been reached
A total of 40 handheld transmitter commands are
available for all channels. If an attempt is made to
program additional transmitters, the red LEDs of radio
channels CH 1 - CH 4 flash. If more memory positions
are needed, see Chapter "10.6 Information on Memo".
10.6 Information on Memo
The use of the Memo depends on the version of the
motor carriage circuit board.
The memory capacity can be extended to 450 handheld
transmitter commands using the optional Memo
accessory part. When plugging in the Memo, all available
transmitters are transferred from the internal memory
to the Memo and stored there. The Memo must remain
plugged in on the control unit.
No more transmitters are stored in the internal memory.
Stored transmitters cannot be transferred from the Memo
back to the internal memory.
All radio channels, including the memory of the Memo,
can be deleted, see Chapter "10.11 Deleting all radio
channels in the receiver".
INFORMATION
Delete the Memo on a new operator.
Otherwise, all stored transmitters of
an operator are deleted and must be
reprogrammed.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9060 base at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9060 base in the language / languages: English as an attachment in your email.

The manual is 8,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9060 base

Sommer S 9060 base Installation Guide - German - 80 pages

Sommer S 9060 base Installation Guide - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info