680551
32
Zoom out
Zoom in
Previous page
1/80
Next page
32
46900V001_Rev-D_EN
7. Removing and fastening covers
7.2 Cover of the ceiling control unit
Observe in particular the following safety instructions for
this chapter.
DANGER
Danger due to electric current!
Contact with live parts may result
in electric current owing through
the body. Electric shock, burns or death
will result.
All work on electrical components
may only be carried out by a trained
electrician.
Disconnect the mains plug before
working on the operator.
If an accumulator is connected,
disconnect it from the control unit.
Check that the operator is not live.
Secure the operator against being
switched back on.
WARNING
Danger due to hot surfaces!
After frequent operation parts of the
motor carriage or the control unit may
become hot. If the cover is removed and
hot parts are touched, they may cause
burns.
Allow the operator to cool down before
removing the cover.
Unscrewing cover
< 1100 mm
Fig. 1
1. Disconnect the operator from the mains voltage.
Check that the operator is disconnected from the
power supply.
Fig. 2
NOTE
If there is an accumulator in the cover of
the ceiling control unit, remove the cover
carefully. The accumulator is loose in the
cover.
Disconnect the accumulator plug from the
circuit board.
2. Unscrew and remove the cover from the ceiling
control unit.
Fig. 3
3. If an accumulator is used, unscrew the cover
carefully.
Disconnect the accumulator from the circuit board.
Remove the cover with the disconnected
accumulator, see Chapter "11.11 Installing and
removing the accumulator".
Installing the cover
1. After working on the ceiling control unit replace the
cover in reverse order.
2. Connect the operator to the mains voltage.
Check that the power supply is connected.
The operator is supplied with mains voltage.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9060 base at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9060 base in the language / languages: English as an attachment in your email.

The manual is 8,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9060 base

Sommer S 9060 base Installation Guide - German - 80 pages

Sommer S 9060 base Installation Guide - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info