680552
42
Zoom out
Zoom in
Previous page
1/80
Next page
42
46900V001_Rev-D_EN
10. Connections and special functions of the motor
carriage
10.7 Cancelling programming mode
1. Press the radio button until all LEDs are out or make
no input for 30 seconds.
Programming mode is cancelled.
10.8 Deleting a transmitter button from
the radio channel
1. Press the radio button repeatedly to select the
required radio channel.
Press and hold the radio button for 15 seconds.
LED
1 x 2 x 3 x 4 x
CH 1
CH 2
CH 3
CH 4
TheLEDashesafter15seconds.
2. Release the radio button.
The radio receiver is in deletion mode.
3. Press the transmitter button for which the command
is to be deleted in the radio channel.
LED goes out.
The deletion procedure is ended.
Repeat the process for additional buttons as required.
10.9 Deleting transmitter completely
from the receiver
1. Press and hold the radio button for 20 seconds.
TheLEDashesafter15seconds.
Afteranother5secondstheashsequence
changestoashing.
2. Release the radio button.
The radio receiver is in deletion mode.
3. Press any button on the transmitter that is being
deleted.
LED goes out.
The deletion procedure is completed.
The transmitter is deleted from the radio receiver.
Repeat the process for additional transmitters as
required.
10.10 Deleting radio channel in the
receiver
1. Press the radio button repeatedly to select the
required radio channel.
Press and hold the radio button for 25 seconds.
LED
1 x 2 x 3 x 4 x
CH 1
CH 2
CH 3
CH 4
TheLEDashesafter15seconds.
Afteranother5secondstheashsequence
changestoashing.
After another 5 seconds, the LED of the selected
radio channel remains steady.
2. Release the radio button.
The deletion procedure is ended.
All programmed transmitters on the selected radio
channel are deleted from the radio receiver.
10.11 Deleting all radio channels in the
receiver
1. Press and hold the radio button for 30 seconds.
TheLEDashesafter15seconds.
Afteranother5secondstheashsequence
changestoashing.
After another 5 seconds, the LED of the selected
radio channel remains steady.
After another 5 seconds all LEDs light up.
2. Release the radio button.
All LEDs are off after 5 seconds.
All programmed transmitters are deleted from
the receiver.
Receiver is completely deleted, this also applies if
the Memo is plugged in.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9060 base plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9060 base plus in the language / languages: English as an attachment in your email.

The manual is 8,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9060 base plus

Sommer S 9060 base plus Installation Guide - German - 80 pages

Sommer S 9060 base plus Installation Guide - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info