680552
23
Zoom out
Zoom in
Previous page
1/80
Next page
23
46900V001_Rev-D_EN
6. Installation
6.2 Preparation for installation
Before installation, you must check whether the
operator is suitable for the door, see also Chapter
"3.7 Technical data".
The operator may only be used:
in combination with door types in the reference list
which can be found at:
http://som4.me/cgdo
Removal of actuation parts
WARNING
Danger of entrapment!
Persons or animals may be trapped
by straps or cords and pulled into the
movement zone of the door. Severe
injuries or death may result.
Remove straps and cords used for
mechanical actuation of the door.
Before installation remove:
manual locking on door
all cords or straps necessary to operate the door
by hand.
Disabling mechanical locks
NOTE
If locks or other locking systems are
installed on a mechanical door, they may
block the operator. This may cause faults
or damage to the operator.
Before the installation of the operator,
all mechanical locking systems must be
disabled.
The mechanical lock on a door with an operator must
be removed or disabled if it is not compatible with the
operator.
Checking the mechanism and weight balance
WARNING
Danger due to falling parts of
doors or complete door panels!
Wires, spring sets and other ttings can
be damaged and break. The door panel
may fall. Persons or animals may be
struck by falling parts of the door or the
complete door panel. Severe injuries or
death may result.
Before installation, qualified personnel must
check the following and adapt if necessary:
wires,springsetsandotherttingsof
the door.
the weight balance of the door.
WARNING
Danger of entrapment!
If the force setting is too high, persons
or animals in the movement area of the
door may be trapped and pulled along
with the door. Severe injuries or death
may result.
The force setting is relevant to safety
and must be carried out by a trained
specialist.
You must proceed with extreme caution
if you check and if necessary adjust the
force setting.
NOTE
If the weight compensation of the door is
incorrectly adjusted, the operator may be
damaged.
The door must be stable.
It must not bend, rotate or twist when
opening and closing.
The door must move easily in its tracks.
1. Check the mechanisms of the door, such as wire
cables, spring sets and other fittings.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9060 base plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9060 base plus in the language / languages: English as an attachment in your email.

The manual is 8,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9060 base plus

Sommer S 9060 base plus Installation Guide - German - 80 pages

Sommer S 9060 base plus Installation Guide - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info