680774
66
Zoom out
Zoom in
Previous page
1/88
Next page
66
S10931-00001_Rev-D_EN
13. Function test and final test
INFORMATION
Reversing: The operator stops on contact
with an obstacle and then moves a short
distance in the opposite direction to
release the obstacle.
In the automatic closing function, the
door opens completely if an obstacle
is detected.
INFORMATION
The operating forces can be modied and
adjusted with SOMlink and a WiFi-enabled
device. For more information, ask your
specialist dealer.
After successful testing of the force settings, the obstacle
detection and the functions, the qualified specialist must
issue the EC Declaration of Conformity and attach the
CE mark and type plate to the door system.
The operator must reverse in the door OPEN direction
when it is loaded with a weight of 20 kg. The weight is
fastened in the centre of the bottom edge of the door for
this purpose.
The door must reverse during the door CLOSE
movement if it hits a 50-mm-high obstacle on the ground.
1. Open the door with the operator.
2. Place a 50-mm-high object in the centre of the door.
50 mm
Fig. Example: Obstacle detection on sectional door
3. Close the door with the operator.
If the door hits an obstacle, the operator must
reverse.
The operator opens the door completely at a pulse
from the transmitter.
If the operator does not reverse, a position reset
is required, see chapter "10.13 Performing a
reset." The positions and the forces must be
reprogrammed.
13.2 Handover of door system
The qualified specialist must instruct the user:
on the operation of the operator and its dangers
on the handling of the manual emergency release
on the regular maintenance, testing and care
measures which the user can carry out, see chapter
"15. Maintenance and care"
on the troubleshooting measures which the user
can carry out, see chapter "16. Troubleshooting."
The user must be informed about which work may only
be performed by a qualified specialist:
installation of accessories
settings
regular maintenance, testing and care, with
the exception of that described in chapter
"15. Maintenance and care"
troubleshooting, except that described in chapter
"16. Troubleshooting."
repairs
The following documents for the door system must
be handed over to the user:
the installation and operating manuals for the
operator and the door
inspection book
EC Declaration of Conformity
handover protocol for the operator
http://som4.me/konform
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9050 pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9050 pro in the language / languages: English as an attachment in your email.

The manual is 10,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9050 pro

Sommer S 9050 pro User Manual - German - 88 pages

Sommer S 9050 pro User Manual - Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info