680549
75
Zoom out
Zoom in
Previous page
1/80
Next page
75
46900V001_Rev-D_EN
17. Taking out of operation, storage and disposal
CAUTION
Risk of injury to hands!
Rough, projecting metal parts may
cause abrasions and cuts when
touched.
Wear safety gloves.
NOTE
If there is an accumulator in the control
unit, it must be removed by a trained
electrician. See Chapter "11.11 Installing
and removing the accumulator".
The operator and its accessories must be disconnected
from electrical power when taking them out of operation
or during disassembly.
1. Pull the power plug out of the power socket.
If an accumulator has been installed, remove
the control unit cover and disconnect the
accumulator from the control unit. See also chapter
"11.11 Installing and removing the accumulator".
Then check that the power is disconnected.
2. Disassembly is in reverse order of installation.
17.2 Storage
Store the packaging units as follows:
in enclosed, dry rooms so that they are protected
from moisture
at a storage temperature from –25 °C to +65 °C
secure to prevent falling
leave room for unhindered passage
NOTE
Improper storage may damage the
operator.
The operator must be stored in closed
and dry rooms.
17.3 Disposal of waste
Observe the instructions for disposal of packaging,
components, batteries and, if applicable, the accumulator.
DANGER
Danger of hazardous substances!
Improper storage, use or disposal of
accumulators, batteries and operator
components are dangerous for the
health of humans and animals. Serious
injury or death may result.
Accumulators and batteries must be
stored out of the reach of children and
animals.
Keep accumulators and batteries away
from chemical, mechanical and thermal
inuences.
Do not recharge old accumulators and
batteries.
Components of the operator as well as
old accumulators and batteries must not
be disposed of with household waste.
They must be disposed of properly.
NOTE
Dispose of all components in accordance
with national regulations to avoid
environmental damage.
INFORMATION
All components that have been taken out
of service must not be disposed of with
normal waste. Unwanted components with
pollutants must be disposed of correctly at
an authorised recycling centre. The local
regulations must be observed.
INFORMATION
Old batteries and battery packs must not
be disposed of with household waste as
they contain hazardous substances. These
must be disposed of properly at municipal
collection points or in the provided
containers of the dealers. The local and
national regulations must be observed.
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9050 base at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9050 base in the language / languages: English as an attachment in your email.

The manual is 8,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9050 base

Sommer S 9050 base Installation Guide - German - 80 pages

Sommer S 9050 base Installation Guide - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info