680549
68
Zoom out
Zoom in
Previous page
1/80
Next page
68
46900V001_Rev-D_EN
15. Maintenance and care
15.3 Care
Clean track, motor carriage and ceiling control unit
1. Pull the power plug out of the power socket.
If an accumulator has been installed, remove the
control unit cover and disconnect the accumulator
from the control unit, see also Chapter "11.11
Installing and removing the accumulator."
Then check that the power is disconnected.
2. Remove loose dirt with a moist, lint-free cloth:
from the motor carriage and the ceiling control unit
from the track and the inside of the track
If required, install the accumulator in reverse order of
removal.
3. Re-connect the operator to the mains voltage. Check
the power supply.
The operator is supplied with voltage.
Cleaning the photocell
Fig. 1
NOTE
Do not change the position of the photocell
when cleaning it.
1. Clean the housing and reflectors of the photocell with
a damp, lint-free cloth.
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9050 base at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9050 base in the language / languages: English as an attachment in your email.

The manual is 8,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9050 base

Sommer S 9050 base Installation Guide - German - 80 pages

Sommer S 9050 base Installation Guide - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info