680549

Sommer S 9050 base Manual

27
Zoom out
Zoom in
Previous page
1/80
Next page
27
46900V001_Rev-D_EN
6. Installation
INFORMATION
The distance may be reduced if a door
handle is attached to the middle of the
door. The door must be able to run freely.
2. The push arm must be at a max. angle of 30° with
the door closed.
½
½
½
½
21 mm
Fig. 3 Fig. 4
3. Close the door.
Select the lintel or ceiling for installation. Measure
the centre of the door at the front and mark the
position on the door and the lintel or ceiling.
4. Mark points 70 mm to the right and left of the centre
of the door at the same height on the lintel or ceiling.
30 mm
min.
15 mm
15 mm
10 mm
65 mm
15
½
½
½
½
Fig. 5 Fig. 6
NOTE
Cover the operator during drilling to
prevent dirt from entering the operator unit
and damaging it.
INFORMATION
If installing on the ceiling, space the drill
holes 15 mm apart if possible. This reduces
the tilting angle of the mounting bracket.
INFORMATION
The drilling depth must be considered
concerning the ceiling and wall thickness,
particularly with prefabricated garages.
It may be necessary to reduce the hole
depth.
Only use permissible mounting materials
appropriate for the supporting surface.
5. Drill two holes (Ø 10 x 65 mm deep) in the ceiling or
lintel.
6. Open the door.
Transfer the mark from the centre of the door to the
ceiling at the rear.
13 mm
Fig. 7
7. Close the door.
Insert the wall plug into the lintel or ceiling. Lift the
track at the front.
Screw the lintel fitting at the front to the lintel or
ceiling with two screws and the washers. Tighten the
screws.
⇒ The track is attached to the lintel or ceiling.
X
X
Fig. 8
NOTE
The operator must always be installed
parallel to the tracks of the door to prevent
damage to the operator and the tracks.
8. Align the operator parallel to the tracks of the door.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9050 base at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9050 base in the language / languages: English as an attachment in your email.

The manual is 8,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9050 base

Sommer S 9050 base Installation Guide - German - 80 pages

Sommer S 9050 base Installation Guide - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info