680646

Sommer Marathon Tiga 800 SL Manual

10
Zoom out
Zoom in
Previous page
1/33
Next page
Installation
9
For installation on the ceiling (D), drill holes at distances of
15 mm, if possible.
Smaller angle of inclination of the fixing brackets.
• The operator can be mounted on the lintel (S) or ceiling (D).
• Measure front centre point (VM) of door and mark on door and on lin-
tel or ceiling.
• Mark points 74 mm to right and left of the centre of door (VM), and at
same height on lintel or ceiling (see Fig. 8).
Wear safety goggles when drilling!
Check thickness of ceiling, particularly in the case of prefabri-
cated garages!
• Drill two holes (Ø 10 x 65 mm).
• Open door. Transfer door centre mark (HM) to ceiling.
Close door.
• Insert plug (1). Lift up operator (2) at front. Secure lintel fitting (3) at
the front with two screws (4) and plain washers (5).
Protect control unit housing (6) from damage!
12
12
2
6
4
5
3 1
11
10
`
0
1
5
`
½
15
`
0
1
5
`
½
½
`
0
1
5
`
½
½
`
0
1
5
`
½
½
`
0
1
5
`
½
½
`
0
1
5
`
½
½
`
0
1
5
`
½
½
`
0
1
4
5
6
7
H
M
P
T
V
`
m
°
HM
`
0
1
4
5
6
7
H
M
P
T
V
`
m
°
HM
`
0
1
4
5
6
7
H
M
P
T
V
`
m
°
HM
`
0
1
5
`
½
11
`
0
1
4
5
6
7
H
M
P
T
V
`
m
°
VM
`
0
1
4
5
6
7
H
M
P
T
V
`
m
°
74mm
`
0
1
4
5
6
7
H
M
P
T
V
`
m
°
74mm
`
0
1
4
5
6
7
H
M
P
T
V
`
m
°
10mm
`
0
1
4
5
6
7
H
M
P
T
V
`
m
°
65mm
10
THP
9
8
8
S
30
min.15
30
15
15
D
½½
½½
½
½
VMVMVM
9
Attention!
Always install operator parallel to the guide rails of the door.
• Lift up operator.
• Align ceiling bracket (1). It should be located within a range of
(R = 0 ... 600 mm).
Use a non-slip, stable stepladder!
• Align operator mechanism horizontally to rear centre of door (HM).
Mark position of holes.
Wear safety goggles when drilling!
Check thickness of ceiling, particularly in the case of prefabri-
cated garages!
• Drill two holes (Ø 10 x 65 mm).
• Insert plug (1). Fit two screws (2) with plain washers (3). Tighten
screws (2) securely.
• Align C-rail (4) at correct height. If necessary, move screws (5).
Tighten screws (5).
• Mount connecting rod (1):
Introduce bolt (2) and attach the retainer (3).
• Mount door fitting (4)
insert bolt (5) and attach retainer (3).
• Pull once on the emergency release cord (N). This unlocks the
trolley (1). Tighten screw (8) on lintel fitting.
• Use connecting rod (2) to push trolley (1) as far forward as possible
(3). If necessary, release switch-trigger (4).
• Align angle of door fitting with centre of door (VM) and mark 5 drill
holes. Drill 5 holes (Ø 5 mm).
14
B
600
0
1
1
HM
3
2
5
4
13
16
15
15
2
3
5
4
3
N
1
2
4 8
7
3
6
5
1
N
16
14
13
HM
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer Marathon Tiga 800 SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer Marathon Tiga 800 SL in the language / languages: English as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer Marathon Tiga 800 SL

Sommer Marathon Tiga 800 SL User Manual - German - 33 pages

Sommer Marathon Tiga 800 SL User Manual - Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info