680647
29
Zoom out
Zoom in
Previous page
1/33
Next page
Maintenance and care
29
Regular checks
Check safety devices regularly, (at least 1x annually), to ensure they function correctly (e.g. BGR 232).
Safety devices that are sensitive to pressure (e.g. safety switch unit) should be checked every four weeks to ensure that they function correctly;
see EN 60335-2-95.
Test Behaviour yes/no Remedy
Door wing to stop when
closing with a 50 mm high
object.
Operator reverses when
encountering the object
yes
no
Leave all settings as they are.
Reduce the force tolerance. Decrease the setting with
TorMinal. Beforehand, open and close the door
completely 2x under supervision.
See section on “Setting maximum force”
Adjust door, call a specialist!
Power switch-off
Procedure as described in
the section on “Emergency
release”.
Emergency release can be
easily activated (pull 1x,
operator is unlocked)
yes
no Adjust end switch for door CLOSED, or activate back-
jump (DIP switch 6 ON).
Repair emergency release.
Check door, see maintenance instructions for the door.
Emergency Release
Open/close door and
activate the strip in the
process.
Behaviour of the door as set
on DIP switch 1.
Safety LED lights up
yes
no Check wiring, tighten terminal connection.
Correctly adjust DIP switch
Remove door operator from operation and ensure that
it cannot restart by accident. Contact after-sales
service!
Safety contact strip if present
Open/close door and
activate the photoelectric
cell in the process.
Behaviour of the door as set
on DIP switch 1.
Safety LED lights up
yes
no Check wiring, tighten terminal connection.
Set DIP switch correctly
Clean photoelectric cell
Correctly adjust photoelectric cell
Remove door operator from operation and ensure
that it cannot restart by accident. Contact after-sales
service!
Photoelectric cell, 1 if present
Possible cause
Force switch-off functions
without limitations
Force tolerance set too high.
Door is incorrectly adjusted
Everything is in order!
Operator pushes the door
closed. Door and operator
mechanisms are strained.
Emergency release is
defective.
Door jams
Everything is in order!
Broken cable, loose terminal
DIP switch incorrectly
adjusted
Strip is defective
Everything is in order!
Broken cable, loose terminal
DIP switch is set incorrectly
Photoelectric cell is dirty
Photoelectric cell is out of
adjustment (bent bracket)
Defective photoelectric cell
Open/close door and acti-
vate the photoelectric cell in
the process.
Door stops Red signal
lights flash rapidly Next
command, operator
moves in door CLOSED.
Safety LED lights up
yes
no
Check wiring, tighten terminal connection.
Set DIP switch correctly
Clean photoelectric cell
Correctly adjust photoelectric cell
Remove door operator from operation and ensure that
it cannot restart by accident. Contact after-sales
service!
Photoelectric cell 2 if present
Everything is in order!
Broken cable, loose terminal
DIP switch is set incorrectly
Photoelectric cell is dirty
Photoelectric cell is out of
adjustment (bent bracket)
Defective photoelectric cell
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer Marathon Tiga 1100 SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer Marathon Tiga 1100 SL in the language / languages: English as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer Marathon Tiga 1100 SL

Sommer Marathon Tiga 1100 SL User Manual - German - 33 pages

Sommer Marathon Tiga 1100 SL User Manual - Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info