474216

Sommer Marathon 1100SL Manual

15
Zoom out
Zoom in
Previous page
1/32
Next page
Initial operation
15
Check door end positions
for OPEN + CLOSED
The running path of the drive can be extended or shortened by means
of the guide idlers.
Check whether the door opens and closes completely. If this isn't the case,
then the running path must be adjusted.
1
2
1. Actuate control device (e.g. button, hand-held transmitter, etc.) once.
The door opens to the until the door OPEN end position is reached.
2. Check whether the door reaches the desired end positions.
Adjust the end positions if necessary. See the chapter
“Commissioning – adjusting the door Closed + Open end positions”.
Checking the emergency release
NOTE!
You can activate Backjump for sectional doors or doors
with ceiling guides by means of DIP switch 6; this relieves
the drive and door mechanisms. Simpler actuation of the
emergency release.
V
N
1
FR
O
N
T
VO
R
N
E
1. Close the door with the drive.
2. Pull once on the emergency release (N).
If the emergency release cannot be actuated, loosen the end switch (V)
and push it a bit in direction (1).
3. Open and close the door with the drive. Recheck the emergency release.
Check the force settings
For every run of the door, the controller compares the stored force values
with the actual values required and automatically adjusts the stored values
upon reaching the end position.
Check: See chapter “Care and maintenance/regular testing”.
Programming the hand-held
remote control
NOTE!
Before programming the hand-held transmitter for the fi rst
time, always clear the radio receiver memory completely.
5
T
2
3.1
3.2
1
7
8
4
5
6
5
3.1
3.2
1
Deleting the radio receiver memory
1. Press and hold the Learn button (1).
After 5 seconds, the LED fl ashes (3.1 or 3.2).
After another 10 seconds, the LED lights up steadily (3.1 or 3.2).
After a total of 25 seconds, all LEDs light up steadily (3.1 and 3.2).
2. Release the Learn button (1) – the deletion procedure is ended.
Programming the hand-held remote control
1. Press the Learn button (1).
▫ 1x for channel 1; the LED (3.1) lights up.
▫ 2x for channel 2; the LED (3.2) lights up.
If no code is sent within 10 seconds, the radio receiver switches to
Normal mode.
2. Press the desired hand-held transmitter button (5) until the LED (3.1/3.2)
extinguishes, depending upon which channel has been selected.
LED extinguishes – programming is fi nished.
The hand-held transmitter has transferred the radio code to the
radio transmitter.
3. For the additional programming of hand-held transmitters, repeat the
steps above. A maximum of 112 memory locations are available for
each radio receiver.
Interrupting the Learn mode:
Press the Learn button (1) until no more LEDs are lit.
Mount the information sign
N
BACK
HINTEN
N
BACK
HINTEN
46
5
0
2V
0
00
-1
7
20
0
6
-0-OC
E
_
R
e
v.A
46
5
0
2V
0
00
-17
20
06
-0-O
C
E
_R
ev
.A
A
B
The information sign concerning the function of the emergency release;
please hang on the emergency release cord.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer Marathon 1100SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer Marathon 1100SL in the language / languages: English as an attachment in your email.

The manual is 4,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer Marathon 1100SL

Sommer Marathon 1100SL User Manual - German - 32 pages

Sommer Marathon 1100SL User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info