32
Quickstart
Caution! Always comply with the safety instructions!
1. Remove battery slot lid and battery
2. Pull off label and attach it in the manual (see
provided space). The label prevents discharge
of battery
3. Insert battery (observe poles) and replace lid
4. Press teach key at the radio receiver/drive unit
5. Select desired radio command,
e.g. radio command 1 = press key until the
LED at the radio receiver is switched off
Programming access code for
radio command 1:
6. Press key
7. Enter radio command: press key
8. Press key
9. Enter radio command again (as block 1 of ac-
cess code): press key
10. Enter block 2 of the access code, e.g.:
- Press key 3 times, max. number of digits: 7
11. Press key to terminate programming
12. Check programmed access code by entering
“”
LED 1 is on for 2 seconds
13. Install Funkcody
8
881
P
8
1
P
1
P
1
