680563

Sommer Duo vision 800 Manual

22
Zoom out
Zoom in
Previous page
1/30
Next page
Operation / Use
t
– 22
Programming the hand-held remote control
1. Press the Learn button (1).
▫ 1x for channel 1; the LED (3.1) lights up.
▫ 2x for channel 2; the LED (3.2) lights up.
⇒ If no code is sent within 10 seconds, the radio receiver switches to
Normal mode.
2. Press the desire hand-held transmitter button (5) until the LED (3.1/3.2)
extinguishes, depending upon which channel has been selected.
⇒ LED extinguishes - programming is nished.
⇒ The hand-held transmitter has transferred the radio code to the
radio transmitter.
3. For the additional programming of hand-held transmitters, repeat the
steps above. A maximum of 112 memory locations are available for
each radio receiver.
Canceling the Learn mode:
Press the Learn button (1) until no more LEDs are lit.
Deleting a hand-held remote control button
from the radio receiver
If a user moves to a group garage unit and wishes to use the hand-held
transmitter with it, all radio codes in the transmitter must be deleted from
the radio receiver.
For safety reasons every button and all button combinations must be
deleted from the hand-held transmitter.
1. Press the Learn button (1) and keep it pressed for ve seconds.
⇒ An LED blinks (which one is irrelevant).
2. Release the Learn button (1).
⇒ The radio receiver is in Deletion mode.
3. Press the hand-held transmitter button whose code should be deleted
in the radio receiver.
⇒ The LED extinguishes. The deletion procedure is ended.
4. Repeat the procedure for all buttons and button shortcuts.
Deleting a channel from the radio receiver
1. Press and hold the Learn button (1).
▫ 1x for channel 1; the LED (3.1) lights up.
▫ 2x for channel 2; the LED (3.2) lights up.
⇒ After 5 seconds, the LED ashes (3.1 or 3.2).
⇒ After another 10 seconds, the LED lights up steadily (3.1 or 3.2).
2. Release the Learn button (1).
⇒ The deletion procedure is ended.
Deleting the radio receiver memory
If a hand-held transmitter is lost, all channels in the radio receiver must be
deleted for security reasons. Afterward, the radio receivers of all hand-held
remote control must be reprogrammed.
1. Press and hold the Learn button (1).
⇒ After 5 seconds, the LED ashes (3.1 or 3.2).
⇒ After another 10 seconds, the LED lights up steadily (3.1 or 3.2).
⇒ After a total of 25 seconds, all LEDs light up steadily (3.1 and 3.2).
2. Release the Learn button (1) - the deletion procedure is ended.
Connecting external antenna
If reception is inadequate with the radio receiver internal antenna,
an external antenna can be connected; see chapter “Functions and
connections - connecting an external antenna”.
The antenna cable may not exert any mechanical force on the radio
receiver; provide for stress relief.
What is button 2 for?
Button 2 is dened for opening and closing the door by means of two
different buttons or channels (2-channel operation). This way the door can
be opened with one button and closed with the other.
If this function is utilized, 2 buttons can be connected. For details on
settings, see chapter “Functions and connections - connecting button 2”
and chapter “Functions and connections - dened opening and closing
(DIP 7)” as well as “Partial opening (DIP 8)”.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer Duo vision 800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer Duo vision 800 in the language / languages: English as an attachment in your email.

The manual is 6,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer Duo vision 800

Sommer Duo vision 800 Usermanual and installation guide - German - 30 pages

Sommer Duo vision 800 Usermanual and installation guide - Dutch - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info