680841
20
Zoom out
Zoom in
Previous page
1/36
Next page
Commissioning
19
Checking emergency release
With sectional doors, or doors with ceiling guides, you have the
option of activating the backjump with DIP switch 6 in order to
offload the operator and door mechanisms.
Close the door with the drive.
Pull the emergency release (N) 1x.
If the emergency release cannot be operated, loosen the end switch
(V) and move it in direction (1).
Open the door with the drive and close it again. Test the emergency
release again.
Checking force setting
Whenever the door is opened or closed, the control unit compares the
memorised force setting with the force actually needed and automatically
adjusts the memorised setting accordingly when the given final travel
position is reached.
For checking details see 'Maintenance and Care' section.
Programming of remote control
Prior to the initial programming of the hand-held transmitters,
clear the memory of the radio receiver.
Clearing radio receiver memory
Press and hold the programming key (1).
- After 5 seconds, the LED (3.1 or 3.2) flashes. After another
10 seconds, the LED is constantly on (3.1 or 3.2).
- After 25 seconds, all LEDs are on (3.1 + 3.2).
Release the programming key (1). All channel data has been
deleted.
Programming the radio transmitter
Press the programming key (1)
- 1x for channel 1; LED (3.1) is on
- 2x for channel 2, LED (3.2) is on
- If no other code signal is transmitted within 10 seconds, the radio
receiver switches to standard operation.
- Aborting programming: repeatedly press the programming key (1)
until all LEDs are off.
Press and hold desired hand-held transmitter key (5) until the LED
(3.1 / 3.2) is off (depending on the selected channel).
The LED is off - the programming process is completed.
The hand-held transmitter has transmitted the radio codes to the
radio receiver.
5
2
6
3.1
3.2
1
7
8
4
5
6
5
2
6
4
3.1
3.2
1
V
N
1
Continue with programming the other hand-held transmitters. To do this,
repeat the above steps. The maximum number of memory blocks is 112
per radio receiver.
Attaching instruction label
Attach the instruction label for the operation of the emergency
release to the emergency release rope.
Attaching warning sign
Attach the warning signs (text + triangle sign) at a position where
they are clearly visible, e.g. beside the push-button (warning triangle)
and on the door leaf (text + warning triangle).
1.
1.
2.
2.
1.
1.
2.
2.
N
N
46502V000-172006-0-OCE_Rev.A
1x1x1x
1x1x1x
46502V000-172006-0-OCE_Rev.A
A
B
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer Duo 500SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer Duo 500SL in the language / languages: English as an attachment in your email.

The manual is 4,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer Duo 500SL

Sommer Duo 500SL User Manual - German - 37 pages

Sommer Duo 500SL User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info