536051
10
Zoom out
Zoom in
Previous page
1/16
Next page
8 Copyright © 2008 Somfy SAS. All rights reserved.
EN
Elixo 500 24 V
Memorising the remote controls
To memorise a remote control:
Press the PROG button on the control unit for 2 [1]
seconds. The red indicator light will come on.
Press a channel on the remote control to which the [2]
motorisation will be linked within 2 minutes. The
red indicator light ashes, the remote control has
been memorised.
If this procedure is carried out using a channel which
has already been memorised, this channel will be
cleared.
To add other remote controls: repeat the above
procedure.
To add a Telis type remote control:
Press the PROG button on the control unit for 2 [1]
seconds. The red indicator light will come on.
Press the PROG button on the back of the Telis. [2]
This must be done within 2 minutes. The red
indicator light ashes, the remote control has been
memorised
To exit programming mode without memorising a
remote control: brie y press the PROG button on the
control unit.
Self-learning
The gate’s travel self-learning is essential when commissioning the motorisation.
During self-learning, the obstacle detection function is not active. Remove any objects or obstacles and do not
allow any persons near or inside the operating range of the motorisation.
To carry out an emergency stop during self-learning, use a memorised remote control.
Before beginning self-learning
Ensure the rail is clean.
Manually move the gate to the closed position.
Re-engage the motorisation:
Turn the release handle to the left.[1]
Move the gate manually until the drive mechanism re-locks. [2]
Turn the key a quarter of a turn to the right.[3]
SuC (closing end limit activated) should be displayed on the moto-
risation screen.
If SuO (opening end limit activated) is displayed, check the
motorisation wiring (see pg. 7).
Start self-learning
Self-learning comprises 2 cycles (1 cycle = 1 opening + 1 closing):
The 1st cycle is carried out without slowing down and enables the
motor to memorise the gate’s entire travel.
The 2nd cycle includes slowing down in order to establish the
minimum torque value needed for movement of the gate.
Press the OK button on the control unit twice to access the menus.[1]
Use the + and - buttons on the control unit to access the AutoSet [2]
menu.
Press the OK button to con rm. Self-learning has started. The gate [3]
must complete 2 full cycles.
OK
OK
-
+
OK
+ -
OK
OK
[1]
[2]
2 s
[1]
[2]
.......2 min........
2 s
[1]
[2]
.......2 min........
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Somfy Elixo 500 24 V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Somfy Elixo 500 24 V in the language / languages: English as an attachment in your email.

The manual is 3,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info