536051

Somfy Elixo 500 24 V Manual

7
Zoom out
Zoom in
Previous page
1/16
Next page
Copyright © 2008 Somfy SAS. All rights reserved. 5
EN
Elixo 500 24 V
Installing the motorisation
Fitting the mounting system
The motor mounting kit provided is to be used on a concrete
base. For all other types of mounting, use the appropriate
fi ttings.
Position the base plate:[1]
parallel to the gate,•
with the symbol of the pinion pointing towards the gate,•
by moving it by 25 mm in relation to the front line of the •
rack (if the rack is fi tted with a cover, measure from the
line on the rack, not on the cover),
so that it does not obstruct movement and to ensure the •
gate is able to open and close completely.
Mark the location for the ground mountings.[2]
Drill to a depth of 85mm.[3]
Insert the plugs.[4]
Tighten the lag screws on:[5]
the threaded section for a rack height of between 110 and •
130 mm,
the threaded section + the unthreaded section for a rack •
height of between 100 and 110 mm.
Screw a nut onto each lag screw.[6]
Place the base plate onto the lag screws with the symbol of [7]
the pinion pointing towards the gate. It must be a minimum
of 23 mm from the ground.
Mounting the motor
Position the motor on the lag screws, insert it and push it [1]
towards the gate.
Ensure the pinion is correctly positioned under the rack.[2]
Set the height of the motor and/or the rack to ensure a [3]
clearance of approximately 2 mm between the rack and the
pinion. This setting is important to prevent premature wear
of the pinion and rack; the pinion must not be supporting
the weight of the gate.
Check that:[4]
the setting nuts all come into contact with the base of the •
motor,
the motor is level,•
the gate runs correctly,•
the clearance between the rack and pinion does not vary •
signifi cantly over the gate’s travel.
Fit a washer and nut onto each lag screw in order to fi t the [5]
motor.
25 mm
14 mm
To facilitate tightening of the lag screws, use 2
nuts to form a “double nut”.
h
25
>23
h100 130
85
77
h
25
50
>23
h100 130
2 mm
NO OK
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Somfy Elixo 500 24 V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Somfy Elixo 500 24 V in the language / languages: English as an attachment in your email.

The manual is 3,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info