814954
13
Zoom out
Zoom in
Previous page
1/72
Next page
13
5. Installation
Attention: all regulations and standards must be complied with when installing this
equipment.
5.1. Combustion air and gas circulation
* This type of stove should be installed in a well-ventilated area. Any air intake grilles
should be placed in locations that are not liable to become blocked.
* Additional air inlets may be needed if the stove is used in simultaneous with other
devises that require an air supply. The installer should evaluate the situation according
to the overall air flow requirements.
* Use of this unit at the same time as other heating devices that require an air supply
may necessitate additional air inlets. The installer should assess the situation in light
of total air flow requirements.
* Under normal operating conditions, the combustion gas flow should create a draught
of 12 Pa one metre above the throat of the flue. For proper installation, at least 78,7
inches (2 metres) of metal flue tube with the same diameter as the unit's smoke outlet
should be fitted vertically above the unit. After this section, sections of tubing with a
maximum angle of 45° may be used. Figure 1 and Figure 2 illustrate correct and
incorrect angles for installing a bend.
Figure 1 - Correct angle for bends
Figure 2 - Incorrect angle for bends
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solzaima Iaco Eco 80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solzaima Iaco Eco 80 in the language / languages: English as an attachment in your email.

The manual is 1.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info