655959

Solo 880 Manual

51
Zoom out
Zoom in
Previous page
1/249
Next page
Safety provisions
ENGLISH 9
x The power tool must not be assembled, maintained, repaired or stored in the vicinity of open flames.
x Before assembly, cleaning, maintenance and repair, always turn off the engine; the stop dial must be set
to "0" and the cut-off wheel must have stopped.
Only the idle speed setting must be performed with the engine running.
x Wear protective gloves for any work.
x The power tool requires regular maintenance. Only perform such maintenance and repair work on your
own that are described in these operating instructions and that you consider yourself skilled at
performing. Any other work must only be performed by specialist workshops authorised by us.
x Danger of burns! Do not touch the muffler while it is still hot – not even for maintenance or to check it for
tight fit.
x Only perform repairs with original spare parts.
x Danger of accident and injury! Never modify the power tool, as this may impair safety!
Before start-up, check the entire power tool for operationally safe conditions. In addition to the notes in the
operating and maintenance notes (Î chap. 8, page 30), check the following items:
x Stop dial and one-touch stop button must be easy to operate.
x The throttle control must move freely and return automatically to the idle position. It must not be possible
to operate the throttle control without pushing (unlocking) the throttle control lock (throttle control
locked).
x The cut-off wheel must be attached firmly to the spindle.
x Danger of fire! Ignition cable and spark plug connector must be firmly in place. Loose connection can
result in sparks which could ignite any escaping fuel/air mixture!
x In case of irregularities, visible damage, improper settings or limited function, the power tool must not be
started. In such cases, have the power tool inspected by specialist workshops authorised by us.
x Only use the power tool if it is in completely assembled condition.
x Keep at least 3 metres [approx. 10 feet] distance from the fuelling site when starting.
Never start the power tool in closed rooms.
x Hold the tool securely and firmly when starting.
Always start up on level ground and securely hold the power tool.
x Perform the starting process as described in chap. 6 on page 24.
x Check the idle setting after starting. The cut-off wheel must not rotate in idle mode.
3.6 During assembly, cleaning, maintenance and repair
3.7 Before start-up
3.8 When starting
… 51 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solo 880 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solo 880 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info