658842
22
Zoom out
Zoom in
Previous page
1/46
Next page
Preparing the equipment for use - Refuelling and adding oil to the chain lubrication system
ENGLISH 22
E
N
G
4.3 Refuelling and adding oil to the chain lubrication system
The tank caps for the fuel tank and the
chain lubrication oil tank are sealed by
means of an O-ring. Both tank closures should
only be tightened finger-tight, without the use of
tools.
If the fuel tank cap is stuck you can insert a
screwdriver into the slot on the tank cap and
use it as a lever to open the cap.
Fuel information
A high performance two-stroke engine operated with a petrol:oil mixture (petrol + oil = fuel
mixture) or with a special fuel mixture for two-stroke engines available from specialists powers
this machine. The fuel mixture can be made up with standard lead-free petrol or with lead-free
premium grade petrol. The minimum octane rating for petrol is 92 ROZ.
Unsuitable petrol or deviations in the mixing ratio may lead to serious engine damage!
Avoid direct skin contact with petrol and avoid inhaling petrol fumes - health hazard!
Mixing ratio
Always use a fuel:oil ratio of 25:1 (4%) for the
first five tank fillings.
After that we recommend a ratio of 50:1 (2%) with the
use of special two-stroke oil "SOLO 2T engine oil"
which we can supply.
With the use of other brand two-stroke oils we
recommend a ratio of 25:1 (4%).
Never store fuel mixture longer than 3 - 4 weeks.
Fuelling
While fuelling always follow all safety instructions and take all safety precautions.
Handle fuel only with the engine turned off.
Carefully clean the area around the filler inlet.
Place the machine with the fuel inlet pointing upwards.
Unscrew the tank lid and fill the fuel mixture up to the lower edge of the filler neck.
Use a funnel with filter to prevent tank contamination.
After filling the tank replace the tank lid and tighten firmly.
Oil in litres
Petrol in
litres
SOLO 2T engine
oil
2% (50 : 1)
Other two-
stroke oils
4% (25 : 1)
1 0,020 0,040
5 0,100 0,200
10 0,200 0,400
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solo 656SP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solo 656SP in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info