658842
10
Zoom out
Zoom in
Previous page
1/46
Next page
Safety regulations - Starting the tool, When working with the saw
ENGLISH 10
E
N
G
2.8 Starting the tool
The power tool must only be started up if it is fully assembled.
When starting the tool, keep a minimum distance of 3 metres to where the tool was refuelled.
Never start the device in an enclosed room.
Make sure that you have a secure footing on firm ground when starting the tool. Always check that
the ground is level and keep a safe hold of the power tool.
Perform the start-up routine as described in chapter 5. "Starting the engine / stopping the
engine".
Once the unit has been started, check the idle setting. The cutting blade must be stationary
during idling.
Once it has warmed up, switch the engine off and recheck the chain tension and adjust as
required.
2.9 When working with the saw
The following safety rules must also be followed in addition to those already listed:
Check the operation of the chain brake every time before you start work (see Chapter 3.9, "Chain
brake").
Work on windfall must only be performed by trained persons.
As soon as the engine is running, it produces toxic exhaust gases which may be colourless and
odourless. Never start up the tool in enclosed spaces. Always make sure that there is sufficient air
exchange if you are working under restricted conditions, such as in a dip or a ditch.
Do not smoke at the place of work or in the close vicinity of the power tool, as this would be an
increased fire hazard.
Work carefully, deliberately and calmly and do not endanger the safety of others.
- Make sure that visibility and lighting conditions are good.
- Stay within calling distance of others who could help in the event of an emergency.
- Take breaks in good time.
- Be aware of potential sources of danger and take appropriate precautionary measures.
Remember that the use of ear defenders makes it more difficult to hear other sounds. This may
also mask sounds warning of imminent danger or shouts of warning etc.
- Remember that freshly debarked wood is very slippery (bark). Also take care in the wet, when
the ground is slippery, on slopes on uneven terrain.
- Look out for obstacles and hazards that could trip you up, e.g. tree roots, tree stumps and
edges. Take special care when working on slopes. Never work while standing on unstable
ground.
- Always hold the power tool firmly with both hands and make sure you have a secure footing on
stable ground at all times.
- Never use the saw above shoulder height and avoid leaning too far forward. Never use the saw
while standing on a ladder, and never climb the tree holding the saw. The only safe way to reach
greater heights is to use a hydraulic lifting cabin.
- Move the chainsaw in such a way that no part of your body would be in the way if the arc of
movement of the saw chain was extended.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solo 656SP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solo 656SP in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info