658841
8
Zoom out
Zoom in
Previous page
1/46
Next page
Safety regulations - Fuelling, - When transporting the equipment
ENGLISH 8
E
N
G
2.4 Fuelling
Petrol is very light and highly flammable. Keep away from open flames and never spill fuel. Do not
smoke at the operating site or at and near the refuelling site!
Stop the engine prior to refuelling.
Let the engine cool down before refuelling - fire risk!
Open the tank lid slowly to allow any excess pressure in the tank to be reduced without the risk of
petrol spraying out.
Fuel may contain substances similar to solvents. Prevent products made from mineral oil coming
into contact with skin and eyes. Wear protective gloves during filling with fuel. Frequently change
and clean protective clothing.
Avoid breathing in fuel vapour.
The refuelling site should be well ventilated.
Avoid any soil spillage of fuel or oil (protection of the environment). Use a suitable mat.
Immediately clean any spilled fuel on the machine. Change contaminated clothing without delay.
Always tighten the fuel tank cap firmly by hand without using any tools. The fuel tank cap must not
be able to work itself loose as a result of the vibrations of the engine.
Check for petrol leaks. Do not start the machine or work with the machine if there is a petrol leak.
Life threatening risk from burns!
Store fuel and oil in approved and correctly labelled containers.
2.5 When transporting the equipment
When carrying the chainsaw for short distances (from one working area to the next), always apply
the chain brake so that the chainsaw is blocked (preferably switch the engine off as well). Carry
the chainsaw by the front handle. The guide rail of the chainsaw should point backwards. Avoid
touching the muffler (risk of being burned).
Never carry or transport the power tool while the cutting tool is running.
When transporting the equipment over longer distances, transporting it in vehicles or shipping
it, always switch the engine off and attach the chain guard.
To prevent leakage of fuel or oil and damage in general, make sure that the device is secured so
that it cannot fall over when it is transported in vehicles. Check the fuel and chain lubrication tanks
for leaks. Ideally you should drain the tanks prior to transport.
Always empty the tanks before dispatching the unit.
Recommendation: Please keep the original packaging in order to protect the equipment against
transport damage in case you ever need to ship it or transport it.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solo 656H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solo 656H in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info