658839
28
Zoom out
Zoom in
Previous page
1/46
Next page
Using the chainsaw
ENGLISH 28
E
N
G
7. Using the chainsaw
Please make sure that you follow all safety instructions and all information in the other
chapters of these operating instructions whenever performing any work on or with the
chainsaw.
Check list for use (key points only):
........................................!
Before starting:
o Power tool in a condition safe to operate ...................! Operating instructions (complete)
o Have the fuel mixture and oil been topped up? ........! Chapter 4.3
o Is the chain tension correctly adjusted ......................! Chapter 4.2
Starting ................................................................................! Complete chapter 5
o Are the starting settings OK.? ..................................! Chapter 5.2
% Has the chain brake been activated ..................! Chapter 3.9
% Sliding switch standard or winter operation ........! Chapter 3.4
% Stop switch set to operating position.................! Chapter 5.2
% If necessary, use the primer to pump fuel..........! Chapter 3.8
% Are the choke and part throttle correctly set? ..! Chapter 3.8 und Chapter 5.2
While working – always work in a safe way ......................! Operating instructions (complete)
o Check the chain lubrication. .....................................! Chapter 4.3
o Check the chain tension and adjust as required. ......! Chapter 4.2
o Check the idle setting. ...............................................! Chapter 8.2
o Functional test of the chain brake. ............................! Chapter 3.9
o Assess the cutting situation .....................................! Chapter 7 (complete)
o While cutting, release the chain brake ......................! Chapter 3.9
o Position the chainsaw for a safe cut........................! Chapter 6 and chapter 7 (complete)
o Operating and maintenance information (complete)....! Chapter 8 (complete)
% Is the saw chain sharp? ....................................! Chapter 8.1
% Is the air filter clean? ........................................! Chapter 8.3
% etc. ......................................................................! Operating instructions (complete)
After finishing the work:
o Slacken the chain tension. .......................................! Chapter 4.2
o Put the power tool into safe storage...........................! Chapter 8.10
o Maintenance, etc. .......................................................! Operating instructions (complete)
For cutting, always make sure that the chain brake is released. If the chain brake is activated
then you must not activate the throttle control, except in order to perform a functional test of the
chain brake, in which case the throttle may be applied briefly (Chapter 3.9).
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solo 651SP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solo 651SP in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info