658836
30
Zoom out
Zoom in
Previous page
1/46
Next page
Using the chainsaw - Removing branches, - Felling
ENGLISH 30
E
N
G
7.3 Removing branches
Do not cut through free-hanging branches from underneath.
Do not remove branches while standing on the trunk.
Remove any obstructing branches before you start sawing.
If you change your standing point, remember that the guide bar must always be on the side of the
trunk facing away from your body.
Always keep an eye on tree and branch movement – plan ahead and proceed with care!
When removing branches on thick hardwood trees, follow the correct procedure described below to
prevent the chainsaw from becoming pinched:
1. Remove any obstructing branches.
2. Cut off any branches which are creating tension.
3. Cut off the main branch (note which side is the compression side and
which the tension side).
If it is important that the wood does not tear, make a relieving cut.
Start this cut on the compression side
#, then finish the cut from the
tension side
$.
The remainder of the branch which is left standing is now no longer
under tension and can be cut off close to the trunk
& .
7.4 Felling
Felling trees is dangerous and requires training. If you are a novice then you must not fell any
trees. You can attend a training course to learn how to fell trees.
Before felling a tree, make sure that:
No persons other than those involved in the
felling of the tree are in the felling area.
Everybody involved in the felling has an
unobstructed path of escape. The path of
escape should be opposite to the planned
direction of the fall of the tree at an angle of
around 45°.
The nearest working area should be at least
2½ tree lengths away
Before felling a tree you need to carefully check the direction of fall and make sure that no persons,
animals or objects are within 2½ tree lengths.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solo 644 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solo 644 in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info