Manual Solo 475 Pro (page 27 of 88) (English, German, Dutch, French, Italian, Spanish)

655641

Zoom out

Zoom in

1/88

5 Using the backpack sprayer

ENGLISH 9

5 Using the backpack sprayer

Ensure that you follow all of the safety

instructions when using the backpack

sprayer.

Every time you use the backpack sprayer, first

check it all over to ensure it is safe to use

according to section 6.1.

5.1 Spraying

x When applying spraying agent, ensure by using

appropriate measures and procedures that the

unintended release of agent to other areas is

minimized and the drift to the surrounding areas

is prevented.

x Always proceed with the greatest care when

spraying.

x Never use the device under windy conditions or

if it is raining, as this would risk widespread

drifting of the spraying agent.

x Check the wind direction before starting work

and select the spraying direction downwind of

the user.

x It is best to perform spraying work in the morning

or evening, as it tends to be less windy then.

x Ensure that you only wet what is in fact intended

to be covered with spraying agents.

x Never spray the agent towards persons,

animals, open windows or doors, cars or

anything else that could be damaged by the

spraying agent.

x Use the spray nozzle suitable for your

application. Applicable nozzles: See section 9

x When spraying, ensure that the spraying agent

is applied evenly and homogeneously to the

treated area.

Pumping and spraying:

Prime the pump with a few quick up and down

strokes of the pump lever.

Hold the spray tube at the shut-off valve in your

hand.

Start the spraying process by pressing the shut-off

valve (a).

Releasing the shut-off valve stops the spray

process.

The red clip can be used to secure the shut-off

valve in its rest position to prevent accidental

spraying. For this, pull the lever slightly away (a)

from the handle and lock the clip (b).

The spray tube can be rotated in the shut-off valve

– after loosening the threaded collar– this is useful

for spraying under leaves.

If the spraying agent is not applied properly, spray

nozzle or filter element could be blocked or

damaged. If necessary, clean or replace the nozzle

and the filter element.

Cleaning: See section 6.7

Replacing the spray nozzle and the filter element:

See section 6.4

5.2 Residual spraying agents /

finishing spraying

Stop spraying immediately when any air is sucked

in and sprayed out through the spray nozzle. This

is indicated by a mist being sprayed from the

nozzle. At this point the spraying agent tank will still

contain a residual amount of less than 200 ml

[6.8 oz]. If you do not want to add more spraying

agent and wish to stop spraying instead, dilute this

leftover amount with two litres [68 oz] of clean

water and spray it on the treated area.

When you finish working, prepare the device for

storage according to section 6.7, thoroughly wash

your face and hands with soap, take off your work

clothing and ensure that it is washed regularly.

Fig. 25

Fig. 26

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solo 475 Pro in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solo 475 Pro Manual

Product: