Manual Solo 473P (page 29 of 96) (English, German, Dutch, French, Italian, Spanish)

655636

Zoom out

Zoom in

1/96

6 Maintenance, cleaning and storage

ENGLISH 11

x Replace the previous nozzle by the new nozzle

or the previous filter element by the new filter

element.

x Reassemble the components of the nozzle

attachment (Fig. 2).

6.4 Greasing the cap gasket

If the tank lid becomes hard to tighten or open,

apply silicone grease to the lid gasket.

6.5 Greasing the piston collar and the pump

piston pump (only for 425, 435 and 473P)

After disassembly of the pump components or after

replacing the piston collar, use water resistant

grease to lubricate the piston and the collar.

6.6 Draining the spraying agent tank and

cleaning all other spraying agent carrying

parts

Drain the spraying agent tank, all other spraying

agent carrying parts and the filling strainer daily

after use and particularly at the end of the spraying

season and thoroughly flush them with clean water.

Any unused spraying agent that is left over in the

device could cause corrosion and hence damage

the device. Special attention must be paid to

wearing parts like spray nozzles, filters and seals.

Please read and observe the cleaning instructions

supplied with the spraying agent.

Recommendation: Use the special SOLO cleaner

for plant protection sprayers (dosing bottle of

500 ml [approx. 16.9 oz], part no.: 49 00 600).

Never use aggressive, acid- or solvent-containing

cleaning agents (gasoline for example).

After cleaning, leave the spraying agent tank open

to dry.

Cleaning the spray nozzle, the filter element and

the filling strainer:

x To depressurise the device, hold the spray tube

in the spraying agent tank or in a suitable

container for the spraying agent and operate the

shut-off valve until no more fluid is sprayed.

x Rinse the nozzle attachment with clean water.

x Disassemble the nozzle attachment (Fig. 2).

x Clean the O-rings, the filter element, the spray

nozzle and the filling strainer with clean water

and a soft brush.

Never use your mouth to blow through the spray

nozzle! Never use hard objects to clean the

nozzles!

x Reassemble the components of the nozzle

attachment (Fig. 2).

6.7 Taking the sprayer out of service and

putting it into storage

Prepare the device for storage according to

section 6.6.

Store the device protected from sunlight in a

secure, dry and frost-free location under a

maximum ambient temperature of 35 °C [95 °F].

There must not be any open fires or similar

nearby.

Ensure that the unit cannot be used by

unauthorised persons, in particular children.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solo 473P in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solo 473P Manual

Product: