Manual Solo 467 (page 23 of 74) (English, German, French, Italian, Spanish)

655796

Zoom out

Zoom in

1/74

Maintenance and care

ENGLISH 11

8.2 Air Filter Maintenance

The air filter separates and retains dirt before the

air reaches the combustion chamber. This reduces

engine wear.

Regular maintenance increases engine life.

Clogged air filters cause performance loss and

increased fuel consumption. This leads to a higher

toxin level in the exhaust gas and also makes

starting more difficult.

When the machine is used all day, the air filter

should be cleaned daily. In severe dust conditions

clean more often in between.

Undo the screw (a)

completely (screw

is retained inside

the filter cover) and

remove the filter

cover (6).

The best way to clean the filter is to simply tap out

any dirt or blow it carefully out with a low blast of

air.

Never wash or clean the air filter with heigh

compressed air or by wetting it; never place in

an oil bath or into cleaning solution.

If engine rpm's tend to drop although the

carburettor adjustments are perfectly set, the air

filter cartridge is clogged and must be replaced by

a new one (Order-Nr. 20 48 280).

Never do realignments on the factory carburettor

settings in order to balance a clogged air filter

system. This procedure would cause engine

damages due overload of the engine.

Warranty claims cannot be accepted for damaged

engine parts caused by improper care and

maintenance.

Insert the new or cleaned fabric air filter into the

casing.

Secure the filter cover by turning the screw (a)

clockwise.

8.3 Spark Plug

The correct spark plug with thermal range 200 is

available under the following brands:

BOSCH WSR6F

CHAMPION RCJ-6Y or similar

The correct electrode gap is 0.5 mm.

Check the plug after every 50 operating

hours and replace if electrodes are worn.

8.4 Shutdown and storage

Clean the power tool after use.

 Never use aggressive cleaning solutions or

those containing solvents to clean any part of the

engine. Never hose down the engine. For best

results, simply wipe down the entire engine with

a dry or slightly damp cloth.

Store the device in a dry, safe location inside a

building (garage, basement, …). There must not be

any open fires or similar nearby. Ensure that the

device cannot be used by unauthorised persons,

especially children.

If not in use for more than four weeks, drain the

fuel tank in a well ventilated location before storing.

Start the engine with an empty fuel tank and drain

the carburettor until the engine stops. Oil residues

from the fuel mixture could otherwise clog the

carburettor jets and make it difficult to start the

device later.

Fig. 10

Fig. 9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solo 467 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solo 467 Manual

Product: