Manual Solo 467 (page 20 of 74) (English, German, French, Italian, Spanish)

655796

Zoom out

Zoom in

1/74

Starting / Stopping the engine

ENGLISH 8

6. Starting / Stopping the engine

Starting with cold engine

 Switch On/Off Switch (1) to ”I” position.

 Close choke with choke lever (5).

 Press primer (4) several times until fuel is visible

in the primer.

 Hold the machine with your left hand on the

carrying handle (15). With the right hand, slowly

pull out the starter handle (8) until resistance is

felt. Then pull quickly and forcibly until the

engine attempts to start (engine fires).

 Once the engine tries to start, immediately open

the choke

and continue to start.

 When the engine runs, use the throttle lever (2)

to accelerate to the required engine speed.

 To return to idling speed, release the throttle

lever.

Starting with warm engine after short stop

 Leave choke in ”open” position

and start

engine.

Should the engine refuse to start despite several

starting attempts, the combustion chamber is most

likely flooded.

In this case we recommend you remove and dry

the spark plug (9). Set the ignition switch to ”0”.

Pull over engine several times, still with spark plug

removed. This will ventilate the combustion

chamber

Replace spark plug and repeat starting procedure.

Shutting off engine

 Release throttle lever and move throttle lock

lever to ”min” position.

 Move ignition switch to ”0” position until engine

stops.

Fig. 4

Fig. 5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solo 467 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solo 467 Manual

Product: