Manual Solo 435 (page 24 of 96) (English, German, Dutch, French, Italian, Spanish)

655633

Zoom out

Zoom in

1/96

2 Safety regulations

ENGLISH 6

2.5 Transportation of the device

x To prevent damage and to eliminate potential

hazards for other road users, use secure lashing

equipment to secure the device and prevent it

from tipping over and falling when transporting it

on a vehicle.

x Take appropriate measures to ensure that the

spraying agent cannot leak or spill. Check the

spraying agent tank and all hoses and pipes that

carry the spraying agent for leaks.

Before transporting the device you should ideally

prepare the device for transportation according

to section 6.6.

2.6 Before and during work

x Every time before you start using the device,

check the entire device to ensure it is safe to use

according to section 6.8.

x Check the spraying agent tank and all hoses and

pipes that carry the spraying agent for leaks.

x Never start working if there are any irregularities

or leaks, if you can see any damage to the

equipment or if the equipment is not working

properly in any way.

In this event, immediately have the device

checked by a specialist workshop.

x The device must only be operated by one

person at a time. Nobody else must be

within a radius of 15 metres [approx.

16 yards] at the same time.

x When starting to pump, ensure that the shut-off

valve is closed. Point the spray tube towards a

free area.

x Always ensure that there is an adequate air

change when working in restricted conditions, in

tight, tall plant growth, in greenhouses, in dips in

the ground or in trenches.

x Always remain within calling distance of other

persons who could help in the event of an

emergency.

x Take breaks at regular intervals.

x Never eat or drink when using spraying agents.

x Never smoke in areas where you are

working.

x When removing the spray tube, do not point to

yourself or other persons with the end of the

tube.

2.7 Maintenance and repairs

Only perform maintenance work and repairs by

yourself if they are covered in these operating

instructions. All other work must be carried out by

an authorised workshop.

The repair of modern devices and their safety-

relevant assemblies, requires qualified, specialized

training and a workshop equipped with special

tools and test devices. The specialist has the

required training, experience, and equipment at his

disposal to provide you with the most cost-effective

solution and can help you in many ways with

advice and service.

x The device must not be serviced, repaired

or kept in the vicinity of naked flames.

x Always depressurise the device before doing

any maintenance work or repairs.

To depressurise the device, hold the spray tube

in the spraying agent tank or in a suitable

container for the spraying agent and operate the

shut-off valve until no more fluid is sprayed.

x Always depressurise the device before

unscrewing the high-pressure hose, the shut-off

valve, the pressure gauge (depending on the

model), the spray tube and the nozzle

attachment.

x All repairs must only be performed using

genuine SOLO replacement parts.

x The device must not be altered in any way, as

this could adversely affect the safety of the

device and potentially cause an accident or

injury.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solo 435 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solo 435 Manual

Product: