Manual Solo 425 Comfort (page 30 of 88) (English, German, Dutch, French, Italian, Spanish)

655637

Zoom out

Zoom in

1/88

6 Maintenance, cleaning and storage / 7 Wearing part / 8 Warranty

ENGLISH 12

Cleaning the spray nozzle, the filter element and

the filling strainer:

x To depressurise the device, hold the spray tube

in the spraying agent tank or in a suitable

container for the spraying agent and operate the

shut-off valve until no more fluid is sprayed.

x Rinse the nozzle attachment with clean water.

x Disassemble the nozzle attachment .

x Clean the O-rings, the filter element, the spray

nozzle and the filling strainer with clean water

and a soft brush.

Never use your mouth to blow through the spray

nozzle! Never use hard objects to clean the

nozzles!

x Reassemble the components of the nozzle

attachment (Fig. 22).

6.8 Taking the sprayer out of service and

putting it into storage

Prepare the device for storage according to

section 6.7.

Store the device protected from sunlight in a

secure, dry and frost-free location under a

maximum ambient temperature of 35 °C [95 °F].

There must not be any open fires or similar

nearby.

Ensure that the unit cannot be used by

unauthorised persons, in particular children.

7 Wearing parts

Various parts are subject to application-specific

wear or to normal wear and must be replaced in

good time if necessary.

The following parts are subject to normal wear and

are not covered by the manufacturers guarantee:

x All rubber parts that come into contact with the

spraying agent

x Spray nozzle

x Filters

x Seals

8 Warranty

We warrant problem free quality and will cover the

cost of replacing parts which are found to be faulty in

material or show manufacturing defects within the

prescribed guarantee period after the date of

purchase.

Please note that specific guarantee conditions may

differ from country to country. When in doubt, please

ask the vendor of the goods. The vendor of the

product is responsible for guarantee applications.

We hope you will understand that we cannot be liable

for damage resulting from these causes:

x Non-compliance with operating instructions.

x Neglecting required maintenance and repair jobs.

x Wear from normal use (particularly: gasket seals,

membranes, collars, spray nozzles and filters).

x Using non-approved tools.

x Use of force, improper treatment, misuse and

accidents.

x Attempted adjustments and repairs by non-

qualified persons.

x Unauthorized modification or changes made to the

device.

x Use of unsuitable spare parts or non-original parts

if such parts are the cause of the damage.

x Use of non-approved media in the spraying agent

tank.

x Damage caused by using the product in the hire or

rental industry.

Normal cleaning, adjustments or maintenance jobs

cannot be claimed as part of the guarantee.

All guarantee work must be carried out by one of our

authorised service centres.

For Australia only: Supplementary warranty notes

specifically for Australia

To make a claim, contact Clayton Engineering, 26

French Ave, Brendale, Q, 4500 on phone 1300 798

022 or email sales@claytonengineering.com.au. You

will be asked to provide proof of purchase and then

will be instructed on the procedure for repairing or

replacement of the product under warranty. All costs

incurred for repair or replace, and additional claims

can be discussed at this stage.

This warranty is provided in addition to other rights

and remedies you have under law: Our goods come

with guarantees that cannot be excluded under the

Australian Consumer Law. You are entitled to a

replacement or refund for a major failure and for

compensation for any other reasonably foreseeable

loss or damage. You are also entitled to have the

goods repaired or replaced if the goods fail to be of

acceptable quality and the failure does not amount to

a major failure.

Fig. 27

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solo 425 Comfort in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solo 425 Comfort Manual

Product: