Manual Solis Vario Temp Kettle - 5516 (page 39 of 53) (English, German, Dutch, French, Italian)

708738

Zoom out

Zoom in

1/53

7776

GB GB



OPERATION

1. Place the appliance on a heat- and waterproof, clean, dry, stable and even work

surface out of the reach of children, near a power outlet. Unwind the power

cord from the appliance base completely and place it in such a way that the

appliance can not be yanked down by it.

2. Take the kettle off the appliance base, push the lid release button and the lid

opens.

3. Fill the kettle with cold tap water (follow the MIN and MAX markings on the

kettle, ﬁll in at most 1,7 litres) and close the lid by pushing it down until it snaps

in. Caution: The lid has to be closed at all times during cooking.

4. If necessary, dry the outside and bottom of the kettle. Place the kettle on the

dry appliance base.

5. Connect the power plug to a suitable power outlet, the power cord has to be

unrolled completely.

6. All control buttons light up brieﬂy and then you will hear a two-time signal

tone and all buttons turn off, except for the temperature 100 °C button, which

is blinking blue, and the ON/OFF button, which lights green. The blue blinking

temperature button and the constantly green lighting ON/OFF button indicate

that the appliance is in standby mode. Press one of the temperature buttons

according to the water temperature you need. The pressed button is blinking

blue. Afterwards press the ON/OFF button, which turns red, while the temper-

ature button is now lighting steadily blue. The boiling process has started now.

7. The appliance will turn off automatically as soon as the water is boiling or the

wanted temperature is reached respectively. The end of the boiling process is

indicated by a two-time signal tone and the constant green light of the ON/

OFF button.

8. Carefully remove the kettle from the appliance base and slowly pour the hot

water into a prepared kettle, using the spout. For safety reasons, we recom-

mend always pouring boiling water through the spout without opening the lid.

Caution: Always be careful not to burn or scald yourself with the hot steam

coming out of the spout!

9. If you do not need any more hot water, pull the power plug, pour the remain-

ing water out of the kettle and let the appliance cool down (this prevents fast

calciﬁcation).



QUICK START FUNCTION:



If you solely press the ON/OFF button after plugging in the power plug, the appli-

ance will simply heat up the water to 100 °C and then turn off automatically. The

ON/OFF button also functions as the quick start button for 100 °C.

Notes:



You can change the wanted temperature anytime during the boiling process or

the keeping-warm phase by pressing a different temperature button.



You can start or stop the boiling process anytime by pressing the ON/OFF button.

To fully shut down the appliance you have to press the ON/OFF button for

2 seconds until all control lights go out.



If you solely press the KEEP WARM button after plugging in the power plug and

then press the ON/OFF button, the water will heat up to 90 °C and then be kept

warm.



Do not tilt the ﬁlled kettle too strongly, especially not backwards, in the direction

of the handle. Never turn the appliance upside down, not even when the lid is

closed. Water might escape even when the lid is closed!



Always make sure that the lid is closed and locked before switching the appli-

ance on.



The kettle bottom covering the heating element is made from high-quality

stainless steel. White residues potentially forming there are limestone deposits

that should be removed as described in the section „Descaling the kettle“ on

page 81.

Please note that:



Standby mode means returning to the 100 °C function if you take the kettle off

the base after or during a boiling process. In keep warm mode the kettle and base

have to be separated for at least 1 minute. The ON/OFF button constantly lights

green and the temperature 100 °C button is blinking blue during standby mode.



Energy saving mode implies that the appliance is connected to a power supply

but no button has been pressed for more than 30 minutes (as long as the KEEP

WARM function is not activated). As soon as the appliance enters the energy

saving mode you will hear a two-time signal tone and all control lights will go

out. The appliance will also enter energy saving mode at the end of the KEEP

WARM function (i.e. after 2 hours).



You can return the appliance from energy saving mode to standby mode by

brieﬂy pressing a button or lifting the kettle and putting it back down.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solis Vario Temp Kettle - 5516 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solis Vario Temp Kettle - 5516 Manual

Product: